 
     |
| 85 2m4 SE / 2.5 Temperature Issues (Page 5/7) |
|
cartercarbaficionado
|
JAN 12, 07:35 PM
|
|
| quote | Originally posted by 82-T/A [At Work]:
Haha... yes, for sure. I'm just curious if anyone has seen anything similar... such as a similar issue. |
|
haha ha....yeah I have. it's the ground under the dash usually. it's stealing the ground for the temp gauge or it's having a poor connection and drawing a little too much power which is also a thing (the gt does alot of things like this).
I would reground the decklid and body and see what happens
|
|
|
|
fieroguru
|
JAN 12, 08:10 PM
|
|
| quote | Originally posted by 82-T/A [At Work]:
Also... can you guys confirm that the coolant comes in FROM the drivers side (thermostat side). I would hope so, since that coolant appears to be much cooler... while the passenger side (exit at the water pump) appears to be hotter. I don't even know what to think if you guys tell me it's the other way around... |
|
You have it backwards. The coolant supply to the engine is on the passenger side and goes to the inlet of the water pump.
The thermostat housing on the drivers side of the engine is the coolant exit from the engine, down the driver side, and to the radiator up front.
Everything looks fine...
If the engine was really overheating, the coolant hose on the driver side of the radiator would be 220+ degrees. My guess your is in the 180-190 degree range.
|
|
|
|
82-T/A [At Work]
|
JAN 13, 07:37 AM
|
|
| quote | Originally posted by cartercarbaficionado:
you are describing the formula to a T. the waterpump is not flowing coolant properly and is recirculating inside the block due to excess clearance. some pumps are litterally 5 mm too short and it causes nightmares but only with the Stat installed. |
|
Interesting... I'm not really having any overheating issues from what I've been able to determine... but I bought a new waterpump and waterpump housing, because I do have a slight leak... which I think is the fault of using the wrong thread sealer on the block for the thermostat housing. So just in case that IS an issue, that'll be rectified anyway.
| quote | Originally posted by cartercarbaficionado:
haha ha....yeah I have. it's the ground under the dash usually. it's stealing the ground for the temp gauge or it's having a poor connection and drawing a little too much power which is also a thing (the gt does alot of things like this). I would reground the decklid and body and see what happens |
|
Oh man, I don't think I even saw a ground for the dash... I'm definitely going to have to look at that. The decklid and block are both ground pretty well. I have a ground strap to the engine block on both decklid hinges... so that's good. But I definitely never saw a ground for the dash. I'm going to have to see where ground is on the dash, and maybe add an extra lead to the frame. Thanks!!!
| quote | Originally posted by fieroguru:
You have it backwards. The coolant supply to the engine is on the passenger side and goes to the inlet of the water pump.
The thermostat housing on the drivers side of the engine is the coolant exit from the engine, down the driver side, and to the radiator up front.
Everything looks fine...
If the engine was really overheating, the coolant hose on the driver side of the radiator would be 220+ degrees. My guess your is in the 180-190 degree range. |
|
Thanks, I don't remember where I was referring to it... but I've got that straight now. I've verified that it is in fact going that way. With the new radiator I have... it comes in hot on the passenger side (of the radiator), and the passsenger side of the radiator (where it exits) is like super cool...
|
|
|
|
82-T/A [At Work]
|
MAR 30, 06:52 PM
|
|
Just going to bump this so I can add a few things to it. As I probably mentioned above... I determined that in fact the car is NOT overheating... but that the gauge is not reading properly.
Two points that I've considered:
1 - It could be something with the wiring harness (not the gauge cluster).
2 - It could be the sensor. I posted about this on Reddit a couple of months ago. Someone had a similar problem and said they had a sensor that was doing the exact same thing. When they replaced it, it fixed the problem. So I just swapped it out.
We've redone the front of the car (which we're still finishing up), just got everything back together and installed a 4 or 5-core radiator. I can't remember which... it was totally overkill for the Iron Duke, but at the time I was trying to do anything i could to mitigate what I thought was an overheating issue. The radiator barely fits under the factory brackets. We had to basically modify them using pliers, an anvil and a mallet to re-shape it.
We also installed a new condenser in front...
She sanded and repainted everything up front... this is after she re-installed the front bumper...
Anyway, it'll be a couple of weeks (we're going on a trip), but once we fill it back up with coolant, I'll report back if the sensor fixed the problem (for the sake of thread closure). I am not sure if I mentioned it above, but I took the opportunity to completely remove the waterpump, replaced the gasket, and checked everything... no blockages or anything like that.
|
|
|
|
cartercarbaficionado
|
MAR 30, 10:32 PM
|
|
| quote | Originally posted by 82-T/A [At Work]:
Just going to bump this so I can add a few things to it. As I probably mentioned above... I determined that in fact the car is NOT overheating... but that the gauge is not reading properly.
Two points that I've considered:
1 - It could be something with the wiring harness (not the gauge cluster).
2 - It could be the sensor. I posted about this on Reddit a couple of months ago. Someone had a similar problem and said they had a sensor that was doing the exact same thing. When they replaced it, it fixed the problem. So I just swapped it out.
We've redone the front of the car (which we're still finishing up), just got everything back together and installed a 4 or 5-core radiator. I can't remember which... it was totally overkill for the Iron Duke, but at the time I was trying to do anything i could to mitigate what I thought was an overheating issue. The radiator barely fits under the factory brackets. We had to basically modify them using pliers, an anvil and a mallet to re-shape it.
We also installed a new condenser in front...
She sanded and repainted everything up front... this is after she re-installed the front bumper...
Anyway, it'll be a couple of weeks (we're going on a trip), but once we fill it back up with coolant, I'll report back if the sensor fixed the problem (for the sake of thread closure). I am not sure if I mentioned it above, but I took the opportunity to completely remove the waterpump, replaced the gasket, and checked everything... no blockages or anything like that.
|
|
some of us only have overheating on our early dukes because the 2 speed we spent a month finding caught on fire (car is fine more a mild annoyance than anything)
also you just gotta flex that pretty paint that wasnt done at 3 am after a case lol. in all seriousness i havent had the time or money to fix this ones body enough to then spend 1k painting it black or blue after finding all the correct cooling system parts that were 84 specific it might get done this year or at least get primer
 [This message has been edited by cartercarbaficionado (edited 03-30-2025).]
|
|
|
|
82-T/A [At Work]
|
MAR 31, 09:23 AM
|
|
| quote | Originally posted by cartercarbaficionado:
some of us only have overheating on our early dukes because the 2 speed we spent a month finding caught on fire (car is fine more a mild annoyance than anything)
also you just gotta flex that pretty paint that wasnt done at 3 am after a case lol. in all seriousness i havent had the time or money to fix this ones body enough to then spend 1k painting it black or blue after finding all the correct cooling system parts that were 84 specific it might get done this year or at least get primer
|
|
Yeah, it can be a pain in the butt. This car has been a fairly solid car, but the level of detail that we've committed to is absurdly financially unfeasible. We're definitely not going to do this with the Corvette. I'm going to "make" gaskets rather than source ultra-rare gaskets from wherever, and re-use bolts from my bucket of bolts, rather than buy specialty bagged bolts remade to OEM specifications, etc.
For us, the exterior of the car already had a decent paint job. It's a re-spray, which is probably not the greatest, but we've been able to sand and buff it out at the edges. Having removed all the panels too makes it easier for us to properly clean-up overspray and things that the re-spray had. We bought it like this... the paint is good quality, but they didn't remove anything, just taped stuff off when they repainted it. There were many parts we had to remove, remove overspray, and then touch-up with a rattle can (sprayed into a cap) with a small brush. If I had to give it a score... 10 being what the car was like brand new, and 0 being the fiberglass is literaly rotting, I'd have to say it's a solid 7. There's no areas where the paint is fading at all. And it looks quite good a few feet away. It just doesn't have the "luster" that factory paint would have. But totally not worth repainting the entire car at this point since the paint is still good.
But yeah, I get it... restoring a car never makes financial sense. It has to be an action done purely out of sheer love of car, or insanity.
|
|
|
|
cartercarbaficionado
|
MAR 31, 08:08 PM
|
|
| quote | Originally posted by 82-T/A [At Work]:
Yeah, it can be a pain in the butt. This car has been a fairly solid car, but the level of detail that we've committed to is absurdly financially unfeasible. We're definitely not going to do this with the Corvette. I'm going to "make" gaskets rather than source ultra-rare gaskets from wherever, and re-use bolts from my bucket of bolts, rather than buy specialty bagged bolts remade to OEM specifications, etc.
For us, the exterior of the car already had a decent paint job. It's a re-spray, which is probably not the greatest, but we've been able to sand and buff it out at the edges. Having removed all the panels too makes it easier for us to properly clean-up overspray and things that the re-spray had. We bought it like this... the paint is good quality, but they didn't remove anything, just taped stuff off when they repainted it. There were many parts we had to remove, remove overspray, and then touch-up with a rattle can (sprayed into a cap) with a small brush. If I had to give it a score... 10 being what the car was like brand new, and 0 being the fiberglass is literaly rotting, I'd have to say it's a solid 7. There's no areas where the paint is fading at all. And it looks quite good a few feet away. It just doesn't have the "luster" that factory paint would have. But totally not worth repainting the entire car at this point since the paint is still good.
But yeah, I get it... restoring a car never makes financial sense. It has to be an action done purely out of sheer love of car, or insanity. |
|
its still going to be very pretty and reliable which is more than can be said for all 3 of the ones that are in "my" fleet
|
|
|
|
82-T/A [At Work]
|
APR 01, 08:42 AM
|
|
| quote | Originally posted by cartercarbaficionado:
its still going to be very pretty and reliable which is more than can be said for all 3 of the ones that are in "my" fleet |
|
Man, you should see the next car she's working on.
If it was going by at 100 miles an hour, it would look awesome. But looking at it from 10 feet away, you can tell it had a fire. Haha...
It's not a Fiero, but she's going to start on it in the next few weeks.
|
|
|
|
cartercarbaficionado
|
APR 01, 10:33 AM
|
|
| quote | Originally posted by 82-T/A [At Work]:
Man, you should see the next car she's working on.
If it was going by at 100 miles an hour, it would look awesome. But looking at it from 10 feet away, you can tell it had a fire. Haha...
It's not a Fiero, but she's going to start on it in the next few weeks. |
|
is it the vette? the 86 i bought for 300 was also briefly on fire lol. i love gm wiring
|
|
|
|
82-T/A [At Work]
|
APR 01, 10:47 AM
|
|
| quote | Originally posted by cartercarbaficionado:
is it the vette? the 86 i bought for 300 was also briefly on fire lol. i love gm wiring |
|
Yes... hah... here's a quick video of one of the current problems:
The fire, from what I can tell, had nothing to do with that problem... but the guy apparently wired up a bunch of accessories, like a 12-disc CD changer, an accelerometer that measures G-forces on some kind of gauge, and a bunch of other weird things.
The guy had no concept of fixing things... and merely "added." There are two positive and negative power cables... and there are two "sets" of horns... I don't even know why...
|
|
|
|