Fiero in Brazil (Page 4/4) AutosBergamini JAN 28, 06:42 PM quote Originally posted by Mike in Sydney: Can you post photos of both sides of the assembled calipers? Also, do you have a photo of the brake caliper on the automobile? Unfortunately I ended up not taking a picture of the assembled part and took it again disassembled. AutosBergamini JAN 28, 06:43 PM quote Originally posted by thejinx13: This kind of topic is really inspiring. I don't have a ton, but if I find you need a part that I have lying around its all yours my friend. Chris I am grateful friend! AutosBergamini JAN 28, 06:45 PM quote Originally posted by olejoedad: That is an 88 caliper with the bridge (outer half) removed. I was not in the best condition, but I will try to leave the best possible within the possibilities. AutosBergamini JAN 28, 06:46 PM quote Originally posted by cvxjet: Here is a post of how to rebuild the 1988 calipers- especially the rear with the extra seal. It has the Centric Brakes part numbers also. (Main 1988 caliper kit Centric PN; 143.62031......Extra Internal seal for 1988 rear Pistons contained in Centric kit PN; 143.62008 http://www.fiero.nl/forum/Forum2/HTML/137765.html I'll check, thanks! AutosBergamini JAN 28, 06:48 PM quote Originally posted by dremu: Apologies, I forgot that the '88 brakes are different. -- A That, I've been seeing a little about it, different years, different pieces. CSM842M4 JAN 30, 08:08 PM Julio - I join the others in welcoming you to the world of Fieros! I found it a little funny that someone in Brazil would have a low-production American car, while I live in the United States and have a 1992 Volkswagen Fox, made in Brazil. None of my three Fieros are 1988 models, but I will watch your project with great interest and offer help when I can. Again, welcome and best of luck! - Chris