 
     |
| 84-87 12" Corvette Brake Swap... (Page 4/28) |
|
Racer_JT
|
AUG 10, 11:56 AM
|
|
|
I thought I read where you use all four front rotors????? Is this not true and I need to purchase 2 fronts and 2 rears? I have another thread on this with no good clarifaction. 2 88-96 front rotors
2 88-96 rear rotors
2 84-87 front calipers
2 88-96 rear calipers (i was told by the parts store that 88 rear calipers were only 88)
1 set sluppy brackets is this right????? Thanks
Jesse
|
|
|
|
Jncomutt
|
AUG 10, 01:06 PM
|
|
|
Jesse, That should work for ya.
|
|
|
|
lou_dias
|
AUG 10, 05:22 PM
|
|
|
Does this retain the 5x100 pattern? I'm purchasing a set of '99 Camaro 16" wheels and I think they use the 5x114 pattern (4.75") so I want that on the front and back. Is there a write up to convert from 5x100 to 5x114? Lou
|
|
|
|
CTFieroGT87
|
AUG 10, 05:28 PM
|
|
|
Lou, 4.75" is more like 120.5mm not 114. Most FWD bolt patterns are like 114.3/115mm correct? ------------------
Christian Thomas
87 Pontiac Fiero GT Burgandy/Silver 5.7L ZZ4 5spd
301rwhp/345rwtq
Next Mod: Not sure yet
|
|
|
|
dguy
|
AUG 11, 08:50 AM
|
|
| quote | | Originally posted by lou_dias: Does this retain the 5x100 pattern? |
|
Yes. See Jncomutt's second post: "All four rotors need to be redrilled for the 5x100 pattern."
|
|
|
|
lou_dias
|
AUG 11, 12:42 PM
|
|
|
didn't BubbaJoeswitch to the 5x4.75" pattern?
|
|
|
|
Jncomutt
|
AUG 11, 01:09 PM
|
|
|
|
|
Racer_JT
|
AUG 24, 06:28 PM
|
|
|
HELP!!!!!!!! When I turn the wheels my brake line bolt hits the shock mount. What do I do? I tried flipping the bracket to change the location of the caliper a little bit, but no help. Jesse
|
|
|
|
Jncomutt
|
AUG 24, 06:30 PM
|
|
|
Do you have the caliper on the right side? The caliper bolt should be above where the shock mount is....
|
|
|
|
Racer_JT
|
AUG 24, 07:13 PM
|
|
|
The line bolts right in the center.
|
|
|
