Did you connect your iKey to one of these three brown wires? If so, you may have connected to the wrong wires as those may be the ones serving power to the HVAC system. There is fourth brown wire behind the three browns, seen in the center of your three white dots, and that may be the main power feed to the radio and wiper. Your indicated brown wires could back feed power through the Fiero's ignition switch to the radio, which may account for why the factory switch needs to be operated to supply power to the radio.
Since I have sold my Mera I cannot check this fourth brown wire function physically for you, and am limited to using the factory diagram like the one above posted by dremu.
I have finally fixed the issue. I connected the brown wire from the ignition switch to the the orange accy wire and e erything seems to be working as it should. Thank you.
[This message has been edited by Chief08 (edited 01-11-2021).]
Gall757
JAN 11, 04:37 PM
I can't seem to get the resolution good enough on this diagram...but you should be able to identify all 5 brown wires.
[This message has been edited by Gall757 (edited 01-11-2021).]
Chief08
JAN 11, 04:40 PM
quote
Originally posted by Gall757:
I can't seem to get the resolution good enough on this diagram...but you should be able to identify all 4 brown wires.
I just fixed the issue. I connected the brown wire from the ign switch to the vehicle's orange accy wire and it worked.
