Its crazy the amount of tolerance differences there are with these parts. My 15" rims rubbed on the control arms when I did some test fitting. I was not overly upset becasue I knew I was going to go with a 17/18" rim combo. If you go to a bigger rim then you should be able to flip the arms around again. Glad you got it all worked out. Sometimes the hard work pays off in the end.

A thought, my ball-joints are not that far back on mine. When I go to take mine apart again I will snap a picture.

[This message has been edited by Spadesluck (edited 08-22-2019).]