 
     |
| My 4.9 wiring thread (Page 3/16) |
|
Mickey_Moose
|
FEB 19, 06:18 PM
|
|
| quote | Originally posted by sanderson:
also transmission cooler lines and TCC brake switch/wiring
|
|
...hence the 'etc' in my post 
|
|
|
|
josef644
|
FEB 19, 07:11 PM
|
|
Thanks guys.
Joe Crawford
Texas
|
|
|
|
Mickey_Moose
|
FEB 22, 10:30 AM
|
|
...added information about the alternator wiring - now that should be everything (finally). 
|
|
|
|
Carver1
|
FEB 22, 10:59 AM
|
|
I am updateing the word document for everyone.
Looks like these three link are broken.
Do you have the full url?
Thanks!
|
|
|
|
Mickey_Moose
|
FEB 23, 08:52 AM
|
|
| quote | Originally posted by Carver1:
I am updateing the word document for everyone.
Looks like these three link are broken.
Do you have the full url?
Thanks! |
|
...fixed...
|
|
|
|
sanderson
|
MAR 01, 11:16 PM
|
|
Mickey_Moose,
I'm trying to help out one of our new members with a temperature gauge problem. He bought a car with the 4.9 swap already done. The PO did not change out the temperature sensor. The car has a two wire sensor in it. The new owner has acquired the correct temperature sensor. Where do you get the connector for the new three wire sensor? I seem to remember I salvaged it off of an '88 Fiero harness.
If you want to jump into the thread it is:
http://www.fiero.nl/forum/Forum2/HTML/098585.html[This message has been edited by sanderson (edited 03-01-2009).]
|
|
|
|
Fieroseverywhere
|
MAR 04, 06:46 PM
|
|
| quote | Originally posted by sanderson:
Mickey_Moose,
I'm trying to help out one of our new members with a temperature gauge problem. He bought a car with the 4.9 swap already done. The PO did not change out the temperature sensor. The car has a two wire sensor in it. The new owner has acquired the correct temperature sensor. Where do you get the connector for the new three wire sensor? I seem to remember I salvaged it off of an '88 Fiero harness.
If you want to jump into the thread it is:
http://www.fiero.nl/forum/Forum2/HTML/098585.html
|
|
I got mine off of a 92 cavalier. There are tons of cars out there that use this type of connector. If you can't find one on the temp sender check the TPS. Wire colors probably wont match on the TPS connector but it will plug in. Not sure on the 88 fiero part.
|
|
|
|
sanderson
|
MAR 04, 10:54 PM
|
|
| quote | Originally posted by Fieroseverywhere:
I got mine off of a 92 cavalier. There are tons of cars out there that use this type of connector. If you can't find one on the temp sender check the TPS. Wire colors probably wont match on the TPS connector but it will plug in. Not sure on the 88 fiero part. |
|
He found one at a junkyard. I think I used the 88 Fiero oil pressure sender/switch. I know I didn't get onre at a junk yard
|
|
|
|
Mickey_Moose
|
MAR 05, 10:32 AM
|
|
|
edited my post to include the temp sensor plug info - also, as you may already know, I posted in the "other" thread.
|
|
|
|
Mickey_Moose
|
MAR 21, 10:37 PM
|
|
|
added a FYI at the end on how the ECM knows what gear the car is in. [This message has been edited by Mickey_Moose (edited 03-14-2011).]
|
|
|
