Original R-12 A/C (Page 2/2)
1985 Fiero GT JUL 28, 02:11 PM
R12a is available for me here in Canada in big box stores, it is not r12, but a flammable compatible mixture, it's supposed to be compatible with both r12 and r134, and you can "top up"either system with it, it worked wonders on my dad's Fiero that needed its first top up in 40 years. Perhaps that is what you're thinking of with the r12 you see being readily available, is it actually r12, or r12a?
TheFabricator JUL 29, 12:04 PM
You can purchase R134a retrofit kits at local parts stores. I have converted three vehicles with them (two of those were Fieros) and they work great. The fittings just screw on and the kit is $20. I don't think it would be too expensive to get a local shop to flush, leak check and charge it as long as there is nothing else wrong with the system. Replacing the seals with the new fittings is a good idea and not too difficult either. I have been lazy before and run R134a with the old R12 seals and been fine for years but supposedly they will fail eventually. Definitely get the system flushed thoroughly though!! The old oil doesn't circulate with the new refrigerant and the compressor will eat itself. I've had terrible luck with the "retrofit" Ester oil so IMO the best way to go is a full system flush and PAG oil with the new R134a. That's just my experience though. Maybe somebody can weigh in if I've been missing something.

------------------
- The Fabricator -


"Whatever your hand finds to do, do it with all your might."

Dennis LaGrua JUL 31, 11:51 AM
The R-12 substitutes will work fine but they are essentially Butane gas that is highly flammable. R-134a in a Fiero will work well with a new accumulator, seals, fittings etc.. The new R-1234 is also flammable but those systems only use a few ounces of it.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

reinhart AUG 10, 02:28 AM
You should have no trouble finding an A/C shop that can change the O-rings, swap the evaporator and then pull a vacuum (this is basically the same procedure regardless of refrgerant type (12, 134, etc). My understanding is that the compressor O-rings are often the source of Fiero A/C leaks. I'd probably ask the shop to change those and the line O-rings and then also swap out the evaporator can. Then have them pull a vacuum and see if it holds overnight. If so, you're probably just going to need to add R12 and you'll be good to go. You said you already have a source for it but if that falls through I've seen fierogear has R12. Keep us posted.