88 gt wont idle, stay running (Page 2/2)
Tallguy68 DEC 29, 11:05 AM
Also, when I took off old egr valve to replace, it wasn’t running with the little washer thingy that makes the port smaller. I did research and put what is supposed to be the right size, but could that be the problem?
ArthurPeale DEC 29, 12:30 PM

quote
Originally posted by Tallguy68:

Actually, the pipe that hooks to the EGR valve did come with the kit. In fact, the fiero store had to send me an extension because, of course, the 88 is a little different.



that's odd, it's not pictured

https://www.fierostore.com/.../Detail.aspx?s=52389

just to make sure - I'm talking about this

https://www.fierostore.com/...spx?s=67019&lp=52389

------------------
Arthur Peale

Tallguy68 DEC 29, 01:22 PM
My bad, you’re right. I was thinking vacuum line, not he Egr tube. But my problem is the opposite, won’t idle at all. Just ran again, and it will stay running at about 2500 to 3k rpm.

My weekend is about over, but looks like I’ll need to pull the plenum and check my work. And get the fuel line pressure tester. Damn I’m getting my new rear calipers next weekend and was hoping to get those bad boys on!
Tallguy68 JAN 06, 04:58 AM
Ha. Didn’t hook the map sensor! Whew.