TRANS. SEAL (Page 2/2)
bjc 350 JUL 25, 07:30 PM
Fitzall is the company that makes those axle stabilizer bearings. I put a set on an 84 I refurbished a few years back. Seemed to solve the problems.
RPYRAZOO JUL 25, 08:16 PM
BJC: Thanks, your answer was my new question.
R
RPYRAZOO JUL 25, 08:20 PM
PS: Looked at FITZALL'S site, exactly which part do I need?
R
OldsFiero JUL 26, 08:03 AM
Yeah, we have a post office. It's so big, the my shop's box number is the letter A! ha-ha Did you get my email?
Marc
RPYRAZOO JUL 26, 09:52 AM
Marc: No. PM me through this forum with your payment total and method. My zip is 14218. We are hearing rumors that something called the "Pony Express" will be available within the next decade! Great to be part of the New Frontier.
R
OldsFiero JUL 26, 03:38 PM
Ponies are a better idea. We've shot so many pigeons making messes in barns that they have been replaced by these
.

and these


I'll PM the info.
Marc
bjc 350 JUL 26, 05:05 PM
The GM 125C 3 speed automatic uses the 75125LRB axle stabilizer bearing. It fits either side. The replacement seal for the bearing is TC-1.375. The bearing driver tool is T404-303. I bought the driver tool, because changing the seal/bearing in the car is not as easy as if you have it out of the vehicle. Wanted to lessen my chances of error. Worked out well.
RPYRAZOO JUL 28, 04:41 PM
Caved in and took it to a highly graded trans. shop, we'll see what his advice will be. Tune in again, same bat time, same bat channel.
R
gjgpff JUL 28, 05:20 PM
The Fiero Store sells these axle stabilizer bearings and seals:
https://www.fierostore.com/...20BEARINGS&d=373&p=1
They're kind of pricey $170 for a pair, and they appear to fit both manual and automatic, and all years. Does that make sense? Are there alternative bearing/seal combos?

I have a leak in my driver's side seal and a seep in my passenger's side seal. Since the transmission fluid is also a bit burned I'm looking at whatever I can do to extend the lifetime of my (Isuzu 5 speed) transmission (88 2.5L).
RPYRAZOO JUL 28, 07:34 PM
I don't have any answers yet but when I know more I'll pass it on. These guys I'm dealing with are real pros, so I'll pass on your questions to them and attempt to answer as many as I can.
R