 
     |
| '88 Cradle Upper Strut Relocation Brackets (Page 2/2) |
|
olejoedad
|
JUL 19, 08:05 AM
|
|
I would beware of anything coming from WSF/Arraut.
My experiences do not give me confidence in their products.[This message has been edited by olejoedad (edited 07-19-2019).]
|
|
|
|
Ravant
|
JUL 19, 11:52 AM
|
|
| quote | Originally posted by olejoedad:
I would beware of anything coming from WSF/Arraut.
My experiences do not give me confidence in their products.
|
|
I'd be curious as to why? They're the only ones currently making the strut relocation brackets at the moment.
|
|
|
|
olejoedad
|
JUL 19, 01:47 PM
|
|
The problems I had with most of their products were fitment and weld quality.
When I called to inquire as to a solution to the problem, I was told that I was wrong, there was nothing the matter with the parts.
For example...
Lowering spindles with no taper for the ball joints, or the taper wasn't deep enough, or too deep, even had one where the taper went the wrong way.
Poor weld quality on their pre-88 Wilwood caliper/12" rotor upgrade, as well as fitment issues.
Be sure to carefully inspect anything bought from this company, and if there is a problem, expect a long wait for resolution.
YMMV.
|
|
|
|