 
     |
| low dollar 3800 turbo project (Page 2/51) |
|
darkhorizon
|
SEP 18, 03:11 PM
|
|
|
This is far from a "race" setup, just a better way to make alot of power on the street with pump gas.
|
|
|
|
KurtAKX
|
SEP 18, 11:32 PM
|
|
Just realized, that's not going into your car is it?
I came to this conclusion based on two things:
1) the many discussions we've had about dogbones; you hate them, and the car in these photos has one.
2) from the little bit I can see, that kinda looks like a manual transmission; the other thing you hate in Fieros.
ok, edit. Three things. Third being there are no partially disassembled snowmobiles in the background of any of these pictures.[This message has been edited by KurtAKX (edited 09-18-2009).]
|
|
|
|
Justinbart
|
SEP 19, 02:17 PM
|
|
|
|
|
FastFieros
|
SEP 19, 05:02 PM
|
|
Scott... Good luck..
the 'real' http://www.fastfieros.com checking in... and I did not call out Dave on the dyno run with Saboo's car, or whoever's it was. I merely made a observation that the video stopped short of the dyno graph jumping up on the screen. Dave clearly explained that the shop was protective of the video being shot to start with.
http://www.fastfieros.com checking out !
|
|
|
|
darkhorizon
|
SEP 20, 12:58 PM
|
|
I dont need your backpedaling in my threads loyde, I hope you check out for good on this thread as I know you have nothing positive to offer.
My buddy did some work while I was at the track today playing with supras... Not sure how much I like the IC being so close to the turbo myself.
|
|
|
|
KurtAKX
|
SEP 20, 01:05 PM
|
|
|
what are you using to run the vgt?
|
|
|
|
Steve25
|
SEP 20, 01:29 PM
|
|
|
Looks like a lot of fun. I'd like to see it run sometime. ------------------
Steve AT 88GTP DOT com
88 GT
|
|
|
|
Steve25
|
SEP 20, 01:53 PM
|
|
|
Looks like a lot of fun. I'd like to see it run sometime. ------------------
Steve AT 88GTP DOT com
88 GT
|
|
|
|
darkhorizon
|
SEP 20, 02:20 PM
|
|
| quote | Originally posted by KurtAKX:
what are you using to run the vgt? |
|
Nothing in stone yet, trying to get ahold of a wastegate actuator I like before I commit to anything. The plan is to run a 7psi wastegate actuator off of a internally gated turbo to move the vgt rack.
|
|
|
|
pmbrunelle
|
SEP 20, 04:53 PM
|
|
I don't know anything about GM factory-style computers, but would you have any unused outputs you could program?
Then, you could use a servomotor to actuate the vanes.
This would make tuning very flexible.
|
|
|
