MY NEW Headlight Mod What do you think (Page 13/20)
fierogtowner OCT 28, 12:07 PM
For the pigtails, I think I can go by from Fieroking's pics.
fierogtowner OCT 28, 04:19 PM
One headlight for the driver side almost done, I had to cut the bracket in half because the rx-7 halos that I purchased are the Euro version and so the high beam will not flush against the bracket because it is a longer headlight.

Therefore I had to cut the bracket in half and modify the one half because the hack saw can't get to where I need to cut.

This is extremely stressful but a test fit was successful. Now it's a matter of replicating the other half. Once they are in place, I don't know how I'm going to get the ground wire to the battery terminal. Question, are the original headlights grounded? Can I just go off of this wire?

If not pics today I should have pics tomorrow.
alex de jorge OCT 28, 10:03 PM
Fierogtowner,

Remenber that the system is a plug n play. One side of the pigtails go to the lights and the other plugs to the vehicles harness. The red cable is for your angel eyes when you have your high beams on, if I am not mistaken. That cable goes to the battery. I hope this helps and don't get frustrated.
antinull.com OCT 29, 10:08 PM
pretty nice expensive tho...
personally i like single bulk light lol
never liked the sleepy eye look
Fieroking OCT 30, 12:55 AM
The red wire is to power the High beams. You need to find a 12 volt source to power them. The Angle Eyes are the short wires coming out just behind the light units. I put connectors on them and tapped into the running lights. That way you can have just the Angle Eyes on without the head lights being on.

The red wire and relays use 12 Volts and the high beam from the Fiero headlight connector to have the both the low and high beams at the same time, also the head lightr connector for the Fiero does provide a ground. So you do not need to add a ground to the system.

Joe Sokol

------------------
85 SE 2.8 - beater coupe-
86 SE 3.4 -in progress 3800 II SC -
88 Formula GT 4.9 5 speed beast
Enough parts outside for another one
-And a 3.4 push rod for sale in the mall Go and look-

fierogtowner NOV 06, 11:36 AM
Sorry for no update, the thing is I had no choice but abandon the project at least for now. The only reason is that the high beam is farther out in the back than the low beam. Therefore, the modified bracket can't flush evenly with the lights, there is no way at for it to work out. I'll submit pics later.
Hudini DEC 19, 10:32 AM

You got those pics yet? I like this conversion so I am interested if something has changed from the housing Fieroking bought.
Raifalino DEC 26, 01:11 AM
Your lights look awesome! If only I had the time....


Raifalino
pheonix97031 JAN 22, 11:01 PM
Can you post a condesnsed step by step? That would be so awesome! If you really wanted to get fancy, you could put it into a word document or PDF and email it to people.... Anyways, PLEASE!!!???


Thanks,

Mike
gunnu MAR 09, 02:41 AM
i would also like to see more on this, i am very interested in doing this mod