 
     |
| MY NEW Headlight Mod What do you think (Page 12/20) |
|
jmbishop
|
OCT 12, 10:40 PM
|
|
| quote | Originally posted by topher_time:
I almost forgot, here's my headlights. Uses Camaro housings with dual filament bulbs.
 |
|
Awsome, I'd use those if they where wider.
|
|
|
|
rjblaze
|
OCT 13, 07:23 AM
|
|
|
Thanks topher_time. I search and couldn't find them anywhere there.
|
|
|
|
ricreatr
|
OCT 13, 01:26 PM
|
|
on those auctions the 240 lights are regular reflectors, but the rx7's are now in projector for the low beam.
better, no?
|
|
|
|
RhinoDj
|
OCT 13, 02:21 PM
|
|
|
I would be interested in a set of these. $300 is resonable if you make them easy enough to drop right in and go...Put me down for a set if you decide to make them.
|
|
|
|
rjblaze
|
OCT 13, 02:40 PM
|
|
|
FieroKing have you had any problems with the top of the fiberglass housing wearing due to the rubbing against the bottom of the headlight door? Did you reinforce this area somehow?
|
|
|
|
Fieroking
|
OCT 14, 12:34 AM
|
|
Basically it would be unbolt the old headlight upper ( 3 bolts) and bolt int the new unit. For the Angle Eyes I just tap into the running light for power on each side. Then you need a 12 Volt source to power the High Beams (there is a relay kit included) Takes less than an hour to install.
Joe Sokol------------------
85 SE 2.8 - beater coupe-
86 SE 3.4 -in progress 3800 II SC -
88 Formula GT 4.9 5 speed beast
Enough parts outside for another one
-And a 3.4 push rod for sale in the mall Go and look-
|
|
|
|
Brian27
|
OCT 14, 11:07 AM
|
|
I'd be real interested in a kit too. Let us know if you decide to offer one...
|
|
|
|
fierogtowner
|
OCT 28, 07:33 AM
|
|
I just got a pair of rx-7 headlights yesterday and I'm finished cutting all of the unnecessary plastic.
Simply put, I need to know how to wire these babies (please elaborate I don't anything about wiring) and how to get the ground to the battery terminal in the rear. I'll post pics later on today.
|
|
|
|
alex de jorge
|
OCT 28, 09:49 AM
|
|
|
The wiring is plug n play. The only headache was the wire that goes to the battery. It wasn't hard at all just time consuming. Be sure to post pics!
|
|
|
|
fierogtowner
|
OCT 28, 11:20 AM
|
|
Well damn, the camera I'm using is complete garbage and the one I need takes crystal clear pics. I'll just do with this one for now.
The two pigtails go to each headlamp. You have black+blue and black+red, which one goes where there are only 2 logical choices  The left or the right? Then you have one other connector must be the power.
On each headlamp, you have 2 stripped ends and 2 other ends, do these wire to the headlamp connectors?
I told you I don't know a thing about all this electrical stuff
|
|
|
