3.6 liter High Feature I a Fiero (Page 11/15)
fieroguru NOV 23, 02:48 PM

quote
Originally posted by Will:

What system did you get that exploded diagram from?



It was from a GM Online parts lookup tool. I saved the diagrams for the entire transmission. Unfortunately, not every part has a part# associated with it.
Will NOV 23, 04:13 PM
Right... we went through that with the MT2 6th gear pair.
msweldon DEC 03, 10:21 AM
Daryl,

What axles did you end up using?
Daryl M DEC 07, 12:55 AM
The axles I went with are from a Cobalt 2.0l supercharged, with the Saab intermediate shaft.
Daryl M DEC 17, 12:53 AM
Update:
I have decided to try to use a Dakota Digital magnetic pickup and 5 magnets on the intermediate axle shaft to provide a VSS signal. I am also going to use a Dakota Digital SGI-5 unit to adjust for exact speed. Any thoughts?
Joseph Upson DEC 17, 06:02 AM

quote
Originally posted by Daryl M:

Update:
I have decided to try to use a Dakota Digital magnetic pickup and 5 magnets on the intermediate axle shaft to provide a VSS signal. I am also going to use a Dakota Digital SGI-5 unit to adjust for exact speed. Any thoughts?



In that case why not consider sourcing a small threaded universal sensor and drilling a hole in the case over the final drive gear for location similar to the early F40. I used the SGI-5 module with the stock sensor and Darths digital circuit and it worked dependably for the 5 or 6 yrs I had it.
Daryl M DEC 17, 11:02 PM
Joseph, for the sake of simplicity and to avoid dismantling the transmission, I decided to mount the aperatice externally.
fieroguru DEC 18, 12:50 AM
You could stick with the stock VSS sensor and just find a simple sprocket with the proper ID to press onto the axle/Tripot

Daryl M DEC 18, 01:43 AM
Guru, interesting method, but I have already ordered what I need for the setup I have planned. Thanks though. If my setup doesn't work I may give this a try.
Daryl
msweldon DEC 18, 12:06 PM
I very well may drill a hole into the saab case and add the VSS as I just nicked a new F40 Quaife for a very fair price and will be splitting the case with a transmission repair fella to get it installed... might as well install the lower ratio final drive as well as guru recommends...