Fierostore- 88 rear wheel well liner / splash guard reviews? (Page 1/1)
cam-a-lot NOV 30, 09:09 AM
Hello

I am going to need a set of replacement 88 rear wheel well liners. It looks like the Fierostore makes something like this in rubber instead of the original plastic

Any reviews/ feedback from people that have bought these? Thanks

Part # 56169 88
Patrick NOV 30, 12:47 PM

quote
Originally posted by cam-a-lot:

I am going to need a set of replacement 88 rear wheel well liners. It looks like the Fierostore makes something like this in rubber instead of the original plastic.



I suspect you know this, but splash guards and wheel well liners are two different things. The liners are made of a stiff plastic, whereas the splash guards were made of a flexible rubberized mat material.
Vintage-Nut NOV 30, 04:14 PM

------------------
Original Owner of a Silver '88 GT
Under 'Production Refurbishment' @ 136k Miles

cam-a-lot NOV 30, 04:16 PM
oh ok. thanks. I did not know the difference. I am looking for the wheel well liners

thanks
richard in nc NOV 30, 05:49 PM
i just installed their splash guards for my 1987.my drivers side was mangled and the passinger side was gone.don't throw away the old ones before installing the new ones.its not obvious how they go on there.the fierostore item seemed like a good copy to me.
Patrick NOV 30, 07:25 PM

quote
Originally posted by cam-a-lot:

I am looking for the wheel well liners



You're not going to find new wheel well liners.
Vintage-Nut NOV 30, 08:43 PM

quote
I am looking for the wheel well liners



Wayne Renninger has wheel well liners in Allentown Pa. {The Mall}

I bet Larry Hubbert has them too in Florida {direct at LHUBBERT2@BRIGHTHOUSE.COM}

Check mrfiero {Mike Valentine} in "The Fiero Factory" {PM or Phone (720) 545-6791}

Also check Todd Weikal at “The Fiero Farm” in South Carolina {Phone (660) 281-5147 / todd@thefierofarm.com}

Or “Mike’s Fiero Parts” on Facebook {Phone (702) 533-2332 / boysatt1@gmail.com}

Of course, look around local first, as the shipping cost will not be 'cheap'...

PS - I forgot 'the new guy' - member 87FieroEnthusiast , check "Various parts for sale" in 'The Mall'

[This message has been edited by Vintage-Nut (edited 11-30-2025).]

Mickey_Moose DEC 01, 01:36 PM
On the subject of the splash guards (not the liners):

I bought the splash guards many moons ago - seem to be of good quality and matched the ones I took off.

Never installed as they like to trap dirty and crap causing that area to rust - left them off without any issues.