 
     |
| EGR vac solenoid 87 v6 vac line question (Page 1/1) |
|
domer94
|
AUG 28, 09:24 PM
|
|
can somebody tell me where that vac line goes to that comes off the solenoid? i must have knocked it loose doing the plugs and it must be causing my 1200 rpm idle. its nasty anyhow and needs to be replaced. i cant see anything behind the motor even with my mirror
|
|
|
|
1985 Fiero GT
|
AUG 28, 09:50 PM
|
|
| quote | Originally posted by domer94:
can somebody tell me where that vac line goes to that comes off the solenoid? i must have knocked it loose doing the plugs and it must be causing my 1200 rpm idle. its nasty anyhow and needs to be replaced. i cant see anything behind the motor even with my mirror
|
|
It goes to a metal tube on the firewall right around there, that goes to the air filter, it isn't critical and likely won't be causing any high idle issues, it is at atmospheric pressure all the time, just a "filtered" intake for the solenoid. I think the solenoid itself might also have a filter in it maybe?
|
|
|
|
Vintage-Nut
|
AUG 28, 10:44 PM
|
|
*THIS* is the Complete V6 Vacuum Diagram for Your Enjoyment
------------------
Original Owner of a Silver '88 GT
Under 'Production Refurbishment' @ 136k Miles
|
|
|
|
Patrick
|
AUG 28, 11:18 PM
|
|
| quote | Originally posted by 1985 Fiero GT:
...just a "filtered" intake for the solenoid. I think the solenoid itself might also have a filter in it maybe?
|
|
Interestingly enough, that metal tube on the firewall goes to the unfiltered side of the air filter canister. But yeah, there is a little foam rubber filter in the solenoid itself.
|
|
|
