Hood Seals & Wind Deflector Seals... (Page 1/1)
82-T/A [At Work] APR 21, 06:57 PM
Hey guys, if anyone cares... I found some good replacements for a couple of things...


Sunroof "retaining" Hood Seals:

... these are the D-shaped seals that attach to the underside of the hood in two flat locations, and are supposed to ensure that the sunroof doesn't bounce around when it's stowed in the front compartment. The replacement seals I got were from Amazon: Foam Rubber Seal Strip, Self-Adhesive D Shape EPDM Rubber Weather Stripping, W:1"; H:0.5",13Ft $20 bucks for 13 feet of it.



and...




.

Wind Deflector Foam Stripping:

... this is the little strip that attaches to the underside of the air deflector that fits into the slot where the sunroof attaches when you've got the sunroof removed. After many years, the strip dries out, cracks, and loses it's padding, basically allowing the wind deflector to practicaly rattle in place. I ordered some thin weatherstripping from Amazon: Neoprene Rubber Black Self-Adhesive Sponge Strip 10mm Wide x 3mm Thick $5.50 for 10 meters of it.

[This message has been edited by 82-T/A [At Work] (edited 04-21-2025).]