 
     |
| Any "Console Skeleton" Updates? (Page 1/1) |
|
mono
|
MAR 18, 10:48 AM
|
|
After searching and reading every thread in the archives, what happened to those "Console Skeleton" 3D printed models, aluminum hybrids and the rest? I've reached out to Matt Meyers who was offering a well built version, but as of yet, no response. Is he still around?
Anyone selling a new/improved version? Updates or info appreciated.
|
|
|
|
skywurz
|
MAR 18, 03:20 PM
|
|
|
There are a couple 3d print ready versions on thingiverse. We have lost a lot of vendors/people offering things for sale over the years. Some people dont realize how much of a niche market this is plus most owners are frugal and also need things perfect. This leads to turnover or loss of people who dont have established stores that sell other things like Rodney does. Also a bunch of people retiring (I believe this is what happen with Fiero fiberglass). Some of the people who sell things are building things in their garage in their free time. A couple of PITA experiences and they hang it up. They were just looking to help but stuff happens. Road to someplace warm paved with good intentions so on.
|
|
|
|
mmeyer86gt/gtp
|
MAR 18, 04:05 PM
|
|
|
i sell a skeleton but it takes some time to print and get out the door so i post when they are avaliable..... defiantly a niche market if i knew i could sell 1k of them then i would go to a manufacture and pay for tooling and injection molding but will probably sell 150 or so and i would be happy with that. they are 3d printed in abs. sold about 20 so far.
|
|
|
|
mono
|
MAR 18, 04:13 PM
|
|
|
Matt...thanks for responding! How much to "build" one for me?
|
|
|
|
fieroguru
|
MAR 18, 04:24 PM
|
|
|
I still have a couple of perfect OEM ones on the shelf... Local pickup only.
|
|
|
|
cvxjet
|
MAR 18, 04:36 PM
|
|
I have one of Matt's Skeleton's (That just sounds crazy) and it fit well and is durable....I think it would shatter if you dropped one hundred lbs on it...but not like the originals where just screwing a screw in shatters it.....
|
|
|
|
mono
|
MAR 18, 05:06 PM
|
|
|
|
