 
     |
| Replacement Outer Door Skin Washers (DIY 3D Print) (Page 1/1) |
|
rafinger
|
DEC 13, 11:50 PM
|
|
Hey there! Creating this thread, as opposed to posting in my own build thread, so it can be easily searched for and found.
I had to drill through one of the proprietary bolt/washer pieces when removing my driver side outer door skin. I saw there aren't any being produced by the Fiero Store or any other supplier, so I made new ones myself! If you want/need to make your own, the Thingiverse link with the 3D print file, as well as an editable format, is down below. It's designed to be used with the a standard countersunk (flathead) M6-1.0 x 16 mm bolt, resulting in a something very close to how they came from the factory. I used a Phillips head for mine, which is how the hardware on the 1984 Fieros came, but you can use a torx head just like the 1985-1988 models if you want to. Hope these can help somebody!
https://www.thingiverse.com/thing:4685090
|
|
|
|
Sage
|
DEC 14, 08:17 AM
|
|
Excellent!
Thanks for taking the time.
Saved to favorites
HAGO! 
|
|
|
|
css9450
|
DEC 14, 08:48 AM
|
|
| quote | Originally posted by rafinger:
I saw there aren't any being produced by the Fiero Store or any other supplier.... |
|
Interesting.... They used to be available. Wherever the Fiero Store was getting them from, might've discontinued them.
But more to the point: Your method is probably superior to the factory design. The stock factory version has a black plastic "cap" on the top of the bolt but unfortunately it is much too easy to ruin it when you try to unscrew it (because the plastic has a matching Phillips or Torx pattern on it). The plastic isn't strong enough to withstand the force you need to unscrew it.
|
|
|
|
Don Kraus
|
DEC 14, 10:48 AM
|
|
I've got 14 of those,anyone need some let me know.I didn't need them for a couple of the rebodies I did.
Don------------------
IMSA 34
60' - 1.555
1/4 mi - 10.519
mph - 130.29
TOO FAR
60' - 1.491
1/4 mi - 11.323
mph - 116.4
|
|
|
|
FieroMaster88
|
DEC 14, 08:13 PM
|
|
|
Iām going to need these for my Indy rebuild! š ------------------
88 Coupe: 2.0L Turbo 4 Cylinder, W2A, T25 Turbo, water/meth injection
84 Indy #64: Restoration Project
84 IMSA wide body SE: 3800 Supercharged
Rear Engine Shop on youtube: https://www.youtube.com/user/fast88fiero
|
|
|
|
Don Kraus
|
DEC 15, 08:30 AM
|
|
Fieromaster,my e-mail is in my profile,send me your address and I'll send them to you after Christmas.Glad to send them to a good Fiero home.
Don------------------
IMSA 34
60' - 1.555
1/4 mi - 10.519
mph - 130.29
TOO FAR
60' - 1.491
1/4 mi - 11.323
mph - 116.4
|
|
|
|
pmbrunelle
|
DEC 15, 08:57 AM
|
|
Good job with including the STEP.
STL files are often trash, and when there's a problem with it, it's a huge PITA to rectify it.
|
|
|
|