 
     |
| 1988 Fieros in Junkyards- get the calipers at the very least! (Page 1/1) |
|
cvxjet
|
NOV 15, 08:11 PM
|
|
There are three 1988 Fieros in junkyards in the West that may have brake calipers that should be saved- 88 calipers are very hard to come by so we should save every 88 caliper we can.
Locations; Two in Phoenix, AZ Pick-N-Save (Oct 29, Nov 11) and one in the Salt Lake City Pick-N-Save (Oct 23)
Please go grab the calipers! (Also would be good to save the rear subframes/suspensions- either for replacements or for conversions...
|
|
|
|
2.5
|
NOV 16, 10:51 AM
|
|
|
Front wheel bearings also wouldnt be a bad idea.
|
|
|
|
mmeyer86gt/gtp
|
NOV 23, 12:18 PM
|
|
|
I have 4 front oem repacked 88 hubs and 2 rear hubs looking for new homes. Were repacked with under 70k miles on them. I put them on the shelf to use and sold the 88 they go in make me a good offer. These are oem pulls from 88's not a knock off chinease crap you find on ebay.
|
|
|
Oregon88
|
NOV 24, 02:14 PM
|
|
The 87GT aren’t the same calipers?
I saw some of those recently on a junk yard car painted white with a fiero logo I think.
|
|
|
|
css9450
|
NOV 24, 03:04 PM
|
|
|
'88 calipers are very different from previous years.
|
|
|
|
Australian
|
NOV 27, 02:22 AM
|
|
|
Take the whole front rack.
|
|
|
|
msweldon
|
DEC 03, 05:04 PM
|
|
<already mentioned but>
And rear cradle...[This message has been edited by msweldon (edited 12-03-2020).]
|
|
|
|
cvxjet
|
DEC 03, 06:55 PM
|
|
|
There is another one showed up out in Modesto P&P....Calipers, suspension, rear subframe and maybe the headlight motor wiring harness and module......
|
|
|
