 
     |
| Finally! Stock looking floor mats (Page 1/1) |
|
Modesto
|
JUN 12, 10:07 PM
|
|
Well, for a saddle '88 interior at least.
I compared 10 or so colors and styles of carpet from Lloyd to make sure I got the closest match possible. Ended up being #520 which I'm pretty sure is what The Fiero Store uses but I really felt like the black emblem was out of place given how little black there is in the interior. Went with thread color #906 and I think I nailed it--looks much more stock to me than the black emblem.
P.S I'm sure these came with floor mats from the factory, but why do I feel like I have never seen a car with them? Do they just blend in very well?
|
|
|
|
Thunderstruck GT
|
JUN 12, 11:16 PM
|
|
|
They do match perfectly and do not have any logo. I'd take a picture of mine but can't open my doors right now because the car is packed in tight.
|
|
|
|
andreww
|
JUN 15, 11:42 AM
|
|
|
Stock floor mats are made of the same material as the carpet, and they fit perfectly, so they are hard to detect in pictures.
|
|
|
|
css9450
|
JUN 15, 12:04 PM
|
|
Here's one in the junkyard.... Black logo, but I don't know if it is factory original or GM-approved aftermarket. Carpet looks like a finer weave.
|
|
|
|
Thunderstruck GT
|
JUN 15, 12:12 PM
|
|
| quote | Originally posted by css9450:
Here's one in the junkyard.... Black logo, but I don't know if it is factory original or GM-approved aftermarket. Carpet looks like a finer weave.
|
|
Not factory, just GM approved > https://www.lloydmatsstore....JEAAYASAAEgKCgPD_BwE
|
|
|
css9450
|
JUN 15, 12:27 PM
|
|
|
That makes sense.... The Lloyd's logo I am sure wasn't on the factory originals!
|
|
|
|
Dennis LaGrua
|
JUN 18, 09:10 PM
|
|
|
Have purchased some really great looking mats from Lloyds. Fine products. ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|
theogre
|
JUN 19, 01:24 PM
|
|
OE floor mats are made w/ same carpet as rest of car w/ heavy "rubber" underlay.
But most to all Driver side ones doesn't have plastic area where feet eats up carpet under pedals. So many wear out then get thrown.
Fiero and many other mats don't have anything that keep them moving forward.
So many are "bent" over at best and often stay that way. Some can cause problems w/ gas and clutch pedals too because get stuffed behind them. (Brake pedal doesn't move much to have mat problems.)
D-side shown some wear on edges and white areas next to gray © is where feet digs. Also some bending on front but bit hard to see here.
The "rubber" back on both have issues too.
P-side is flat only because no-one there most times.
------------------
Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should.
(Jurassic Park)
The Ogre's Fiero Cave[This message has been edited by theogre (edited 06-19-2020).]
|
|
|
|
Mickey_Moose
|
JUN 28, 11:11 AM
|
|
| quote | Originally posted by theogre:
Fiero and many other mats don't have anything that keep them moving forward.
So many are "bent" over at best and often stay that way. Some can cause problems w/ gas and clutch pedals too because get stuffed behind them. (Brake pedal doesn't move much to have mat problems.)
|
|
Our 88 factory floor mats came with "Velcro" sewed to the back near the seat side that grabs the rug to prevent it from moving - of course this just has made the carpet underneath get all fuzzy over the years of lifting the floor mats to clean underneath. 
|
|
|
|