 
     |
| New Hubcaps/Rims - 17in (Page 1/1) |
|
Vicophine
|
MAY 07, 12:58 PM
|
|
Hey everyone! Recently I had to get new wheels for my 88 4-cylinder, now I am in the market for some hub-caps/rims that would look nice on my car.
They are 17inch wheels, thanks for the input and feedback!
Note: Was told to "keep it how it is, no rim/hub-cap" but I'm not sure how I feel about that.
Picture of the car with the "new" wheels/tires:
https://imgur.com/a/Mq95PMR[This message has been edited by Vicophine (edited 05-07-2019).]
|
|
|
|
olejoedad
|
MAY 07, 01:32 PM
|
|
Center caps would look good.
Just something simple to cover the lugnuts.
|
|
|
|
Vicophine
|
MAY 07, 01:41 PM
|
|
| quote | Originally posted by olejoedad:
Center caps would look good.
Just something simple to cover the lugnuts. |
|
I wouldn't mind that at all, not sure if the ones on the Fiero Store for example would fit 17's though. If they do, then that is a very good contender!
|
|
|
|
css9450
|
MAY 07, 03:18 PM
|
|
|
How about the little chrome center caps like police cars use? Chevy Impala, etc.... Bolt pattern would be wrong though. [This message has been edited by css9450 (edited 05-07-2019).]
|
|
|
|
Vicophine
|
MAY 07, 03:51 PM
|
|
|
Sounds like a really dumb question, but the caps on the Fiero store say for "14/15 inch wheels", but I don't see why the caps themselves would not fit on my 17's, as it's just the center piece to cover up the lugnuts?
|
|
|
Patrick
|
MAY 07, 04:50 PM
|
|
| quote | Originally posted by Vicophine:
I don't see why the caps themselves would not fit on my 17's, as it's just the center piece to cover up the lugnuts?
|
|
Do all hubcaps fit all wheels?  Doubtful.
|
|
|
|
css9450
|
MAY 07, 04:54 PM
|
|
| quote | Originally posted by Vicophine:
Sounds like a really dumb question, but the caps on the Fiero store say for "14/15 inch wheels", but I don't see why the caps themselves would not fit on my 17's, as it's just the center piece to cover up the lugnuts? |
|
If I'm not mistaken, the "center caps" the Fiero Store sells are just the little 2"-diameter circle to fill in the hole in the center of the aluminum wheels. It doesn't cover the lugnuts at all.
Unless you're seeing something else on their site I haven't found.
|
|
|
Patrick
|
MAY 07, 05:09 PM
|
|
Maybe these from the 13" wheels on the 84's would work... although they only cover the spindles, not the lug nuts.
[This message has been edited by Patrick (edited 05-07-2019).]
|
|
|
|
olejoedad
|
MAY 07, 08:35 PM
|
|
You need to measure the ID of the ring surrounding the lugnuts.
Once you have that info, it's just a matter of finding a center cap that fits.
|
|
|
