 
     |
| Tail light diameter (Page 1/1) |
|
LornesGT
|
DEC 26, 12:09 AM
|
|
What is the diameter of the Ferrari looking tail lights some of you have used?
Thank in advance.
Lorne
|
|
|
|
hnthomps
|
JAN 01, 08:31 PM
|
|
If you will accept measurements on a Mera tail light lens, I can give you ID and OD measurements.
Nelson
|
|
|
|
LornesGT
|
JAN 01, 10:30 PM
|
|
|
Yes, please do they look to have the right proportion. I have a grand idea of making my own but with a twist.
|
|
|
|
hnthomps
|
JAN 03, 02:15 PM
|
|
I measured the Mera tail light lens a few minutes ago and the dimensions are as follows:
OD - 6.08"
ID - 5.79"
These measurements were made at the base of the lens and were above the next step ledge. Based on visual inspection, the Mera lenses are very similar (and almost exactly the same size) to the F308/328 lenses. Mu guess is that there is less than 0.1" difference but I have never measured a F car tail light lens.
Nelson[This message has been edited by hnthomps (edited 01-04-2019).]
|
|
|
|
LornesGT
|
JAN 03, 10:02 PM
|
|
|
|
|
Gall757
|
JAN 04, 11:52 AM
|
|
|
kinda odd that an inside diameter is larger than an outside diameter.....but it must be obvious to those who know the lens.
|
|
|
|
Rexgirl
|
JAN 04, 04:20 PM
|
|
|
Simple explanation: clearly manufactured with the same technology as the TARDIS
|
|
|
|
Blacktree
|
JAN 04, 04:47 PM
|
|
LOL 
|
|
|
|
hnthomps
|
JAN 04, 06:45 PM
|
|
| quote | Originally posted by Gall757:
kinda odd that an inside diameter is larger than an outside diameter.....but it must be obvious to those who know the lens. |
|
No, that just happens when you are in a hurry and do not check the typing. You can (and I did) reverse the ID and OD numbers. I will go back and edit them to the correct values.
Nelson
|
|
|
|
LornesGT
|
JAN 04, 09:43 PM
|
|
|
I notice that as well but figured you meant the inner light assembly was a different diameter than the outer light assembly.
|
|
|
