The Getrag F23 Tutorial - By Emc209i (Page 3/23)
1988holleyformula OCT 19, 04:36 PM

quote
Originally posted by Niterrorz:

wow man ask and thou shall receive.....thanks! i gotta ask at the end is that fiero guru thats saying he loves red or you that loves red?




That'd be L67 loving the red in his ratings bar. But he said not to touch it, so I can't switch my plus to a neg for him...
ARFiero OCT 19, 04:45 PM
Thanks for the write-up! I am getting this transmission soon and will be contacting you about the cables.
Sourmug OCT 19, 05:15 PM
Great information, thanks for posting it.

Nolan
JamesCurtis OCT 19, 07:11 PM
Great writeup! Now if someone only made the mounts for the 60* bellhousing we'd have a lot of conversions going on. Thanks for your time and effort on this, the Fiero community will certainly benefit from this writeup.
BMTFIERO OCT 19, 08:38 PM
Thank you x3
+4U

edited: after reading the complete write-up I take back my +.

[This message has been edited by BMTFIERO (edited 10-19-2011).]

lonewolf_305 OCT 19, 09:26 PM
great write up. Will be much help when doing mine. Might be in on the group buy if it happens.
nitroheadz28 OCT 19, 10:16 PM
Thanks for taking the time to do this, I already had a + for you.

Now I just need to look in the other F23 threads to see whats needed to bolt up to a 3800. Still not clear on the bellhousing swap thats necessary.
Jfrost OCT 19, 11:48 PM
Amazing write-up and timing, I was actually reading a bunch of threads about this today. Its good to see so much useful information in one thread. Thanks!
tesmith66 OCT 20, 06:30 AM
Excellent. This forum needs a tech article section for stuff just like this.

------------------
1986 SE 350 V8

Trinten OCT 20, 01:03 PM

quote
Originally posted by nitroheadz28:

Now I just need to look in the other F23 threads to see whats needed to bolt up to a 3800. Still not clear on the bellhousing swap thats necessary.



2000-2002 Pontiac Sunfire or Chevy Cavalier - Only the 2200 engine vehicles - others use the ecotech pattern. From searching car-part.com it appears that the vehicle Vin "4" is the one you'd want. The Vin "F" appears to be Ecotec motors.



quote
Originally posted by FieroWannaBe:

The SBC looks great too. I see the AFR heads, are they the street 195s?
I hope it has a incredibly long duration cam and a single plane to take advantage of the flow., the exhaust looks well thought out too.



Yes, Yes they are. AFR 195cc Eliminator Street Heads, angled plugs. The builder said they were nicest heads "right out of the box" he'd ever seen. I know AFR has had some issues in the past, but I guess they got their QC up to par - or I just got really lucky. The exhaust was also built around the builders recommendations. The cam I went with was Comp Cams 280XFIHR13. Scott (The builder) thought it was going to be a little too mild, but he was pretty impressed with it. The big thing was finding a cam that would work well with the carb but was designed/would work with EFI. This had the best of both worlds, and it's ramp rate (an undervalued/overlooked aspect by most people) is great.