What Did You Do To Your Fiero...TODAY ? (Page 2/686)
topher_time AUG 27, 01:34 PM
Pulled it out of the shop so I could work on a Jaguar.
rwalley AUG 27, 01:43 PM
I picked it up from the P/O
SLOWnSTEADY AUG 27, 01:46 PM
started putting the sanded/prepped panels back on the car because I will not be able to paint it like i was hoping...
TXGOOD AUG 27, 01:51 PM
I drove mine to work for probably the only day this week because it looks like it may
start raining and I don`t really like driving it in the rain.
I also got an e-mail from Doug @ Fiero Warehouse telling me my IMSA 1/4 panel scoops
were ready so I paid for those although I have to wait until I paint my car to use them.
Boominator AUG 27, 01:52 PM
I replaced the steel rear brake lines on my '84 coupe, the right hand rubber flex hose, the caliper bleeder screws & bled the brakes, flushing out all of the old brake fluid.
Just as an FYI for those who tackle this project: the steel lines are 3/16" (4.7mm) tubing that use European M10-1.0mm nuts and Bubble style flares. The Advance Auto Parts part numbers for universal length lines all begin with "BLE" (bubble flare European). The couplers to join these universal length lines is P/N 327512, M10-1.0mm. The bleeder screws are M10-1.5mm and go by Doorman P/N 13908. The right rear rubber flex hose is P/N H38346. The only reason I'm posting all this detail is that I tried to search for the parts needed prior to embarking on this job without success.Now I know and this may help a member in the future.
VFR182 AUG 27, 01:53 PM
Paid for the new steering wheel i bought off ebay for my 85.
Formula88 AUG 27, 02:05 PM
Drove it to work, and bought a fuel filter.
Winkie AUG 27, 02:54 PM
Tried to fix the pass side dash speaker. Theres a loose wire somewhere i just have not found it yet.
Blacktree AUG 27, 03:23 PM
I drove it to work. But before I left for work, showed it the SPEC Stage 2 clutch that was delivered today. The Fiero seemed to be pleased.
ALLTRBO AUG 27, 03:34 PM
I rode my motorcycle because my remaining Fiero is broken. Pretty typical I guess.

When I get off work I'll finish installing the Speedhut gauges into this car and figuring out why the cooling fan doesn't come on because I just sold my daily driver Fiero. Thank goodness it's not supposed to rain most of this week. I like riding to work better than driving that car anyway.

------------------
'87 Fiero GT - for sale/trade
'86 Fiero GT 3.4 - for sale/trade
'96 Talon TSi AWD - 11.9 @ 116, sorta broke again
'90 Camaro IROC-Z twin-turbo - sorta broke again
'95 Kawi GPZ1100 - too fast