$$$$$$$$$$$$$ WOW! More updates on Fiero GT Tail light lens!!!! $$$$$$$$$$$$$$ (Page 95/115)
RPMProto DEC 11, 03:34 PM
Raydar DEC 18, 10:32 PM

quote
Originally posted by RPMProto:

The next step is to order a clear lens and have custom lenses created. Contact David @ RPM Prototyping.

Looking forward to working with you.



David, we have emailed before.
I'm still waiting for my notification from Goody.

Free <bump!>
Christine DEC 19, 12:40 AM

quote
Originally posted by IMSA GT:


https://www.ebay.com/itm/3M...4:g:Kc8AAOSwPe1T6PRv



I found 3/8" butyl tape at the local Napa store, I was surprised and had looked several places before stopping by to see what they had, I did have to explain what it looked like and what it was for and then one guy says I think we have that stuff but it is called windshield sealer, he brings it out and it was in fact the correct item, basically black 3/8" tar rope.
kgoodyear DEC 19, 09:36 AM

quote
Originally posted by Christine:
I found 3/8" butyl tape at the local Napa store, I was surprised and had looked several places before stopping by to see what they had, I did have to explain what it looked like and what it was for and then one guy says I think we have that stuff but it is called windshield sealer, he brings it out and it was in fact the correct item, basically black 3/8" tar rope.



Let us know how it works
Thunderstruck GT DEC 19, 09:55 AM

quote
Originally posted by Christine:


I found 3/8" butyl tape at the local Napa store, I was surprised and had looked several places before stopping by to see what they had, I did have to explain what it looked like and what it was for and then one guy says I think we have that stuff but it is called windshield sealer, he brings it out and it was in fact the correct item, basically black 3/8" tar rope.




quote
Originally posted by kgoodyear:


Let us know how it works



That is what GM used however, it wasn't as wide. The width was just slightly narrower than the channel it fits in on the tail lamp housing. Back then (early 90's) when you bought a lens GM included the butyl tape in the box. It is because the product is the same as for setting a windshield, attempting to separate the lens from the housing is a royal P.I.T.A.

I have no clue as to why GM chose to use this product for attachment as servicing becomes a nightmare and your chances were much better needing to replace a lens vs. replacing a windshield. Perhaps it was what 3M offered.

Today, I would use silicone sealer.
fierofool DEC 19, 11:09 AM
Has anyone used or considered using Flex Glue? Made by the same people as Flex Seal and Flex Tape. I used the Flex Glue to repair separated vinyl trim inside my Fiero, and it has been working superbly.

Flex Glue comes in a tube and can be applied in a bead down inside the housing groove in the same manner as caulk or RTV.
kgoodyear DEC 19, 11:24 AM

quote
Originally posted by fierofool:

Has anyone used or considered using Flex Glue? Made by the same people as Flex Seal and Flex Tape. I used the Flex Glue to repair separated vinyl trim inside my Fiero, and it has been working superbly.

Flex Glue comes in a tube and can be applied in a bead down inside the housing groove in the same manner as caulk or RTV.



Just so it doesn't harden over time
kgoodyear DEC 19, 03:08 PM

fierofool DEC 19, 06:17 PM

quote
Originally posted by kgoodyear:


Just so it doesn't harden over time



On the tube, it says it is a rubberized waterproof adhesive that resists mold and mildew. I have white, but I think it comes in gray and black, too. Fully cures within 24 hours and is workable for about 10 minutes. Instant grab so clamps are usually not needed.

Some previous comments spoke of the slight gray cast of the graphics. Is it possible to make the graphics more black in the P2 run?
kgoodyear DEC 19, 10:27 PM

quote
Originally posted by fierofool:

Some previous comments spoke of the slight gray cast of the graphics. Is it possible to make the graphics more black in the P2 run?



I will pass this along to the decorator