Just picked up an 87 SE basket case (Page 37/37) cyrus88 MAR 19, 10:04 PM quote Originally posted by 78_elky: I did snap a few of the clips that go on the door trim so I may buy a couple new sets and just replace those if the trim doesn't stay stuck really well. Jessica I just bought some exact replacement from Oreilly Auto: Dorman 963-025D, GM Interior Push Retainers, qty-3 per pack. 78_elky MAR 20, 10:44 AM Unfortunately I broke the outside trim clips that hold the black molded body trim on the car. They seam like they are still attached, but not as good as before. I also took the gas tank out last night and found the leak was the O-ring on the sender. So that is good. I also noticed the supply line going through the sender top is loose and isn't held in place by any weld/brazing. I'm going to need a new sender unit possibly or a used one, or I may try to braze the hard line back onto the plate. Obviously I'll be very careful if I try to braze it, and honestly I'd much rather not have to do that if I can avoid it. Jessica Patrick NOV 26, 05:53 PM I just discovered that this informative 10 page thread is now completely useless because the dozens and dozens of helpful images have disappeared. People... if you're running a Windows PC, please use PIP to post images here. 78_elky NOV 26, 06:25 PM quote Originally posted by Patrick: I just discovered that this informative 10 page thread is now completely useless because the dozens and dozens of helpful images have disappeared. People... if you're running a Windows PC, please use PIP to post images here. I know what you mean! I tried to do it but after spending hours I couldn't get all the pics put back into the thread in any meaningful way. The good thing is it sends me a notification if someone does decide to post to the topic so I can just answer a question. Do you need to know anything? Jessica Patrick NOV 26, 06:53 PM quote Originally posted by 78_elky: Do you need to know anything? Yes Jessica, I need to know why you didn't use PIP to post your images.