New engine swap, 4.9 V8 to a 2.0 4 cylinder (Page 24/34)
colowill APR 15, 06:30 PM
Awesome ill be sure to take a lot of pictures and make a build thread . This engine swap looks so fantastic just not a lot of documentation on many of them
colowill APR 15, 06:36 PM
Also random stupid question but I will be using the ecm from the grand am correct?
FieroMaster88 APR 15, 06:52 PM
Yes, that's correct.
colowill APR 16, 12:32 AM
I was looking into more things today I know youre running a manual so it wont be identical but how did cv shafts work out for you. I know the spline count hex nut size and axle nut thread are all the same just unsure on if I can get the right length axles. Thanks for all of your help with this

I also forgot to ask if you had a part number for tje right ecm laying around this guy has all of the wiring and whatnot but does not have an ecm

[This message has been edited by colowill (edited 04-16-2014).]

FieroMaster88 APR 16, 08:27 AM
The transmission mounts to the cradle in the same location as the Fiero trans and uses the same axles. You can use a computer from any car that has the 2.0 turbo engine. My engine came from a 1990 Sunbird GT. Check eBay or www.car-part.com, you should be able to find one.
FieroMaster88 APR 20, 07:51 PM
Installed the passenger side dew wipe and replaced the broken wheel stud in the rear. Now I just have to align it.
FieroMaster88 MAY 03, 07:00 PM
Took the car for a drive today. It defiantly feels faster with the new fuel pump! 45psi fuel pressure at wot, before I was at 38. AFR is better now at wot too.
Csjag MAY 04, 07:55 AM
What would you estimate 0 to 60 to be and are you having trouble with the engine running hot? Thanks
FieroMaster88 MAY 04, 01:00 PM
No idea on 0-60, really don't want to throw out a bs guess, lol. I've had no problem with it running hot.
Snapperhead MAY 05, 09:05 AM
The car looked great. Was checking it out at Mendon.. Couldn't find you though.

Vince