Looking to buy an oil pressure sending tube for an 88 2.8. While removing mine for a 3.4 swap, I bent the copper tube and put a sizeable split in it. Would like to buy a replacement or if anyone has any suggestions.

Thanks

------------------
Adam
1988 Pontiac Fiero GT
2014 BMW 428i

The oil sender tube should be the same on all V6 engines.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

Or you can just mount the oil sender down low onto the block itself with an adapter getting rid of that tube. Just need to extend the wires some and this gives a cleaner look.

Ya, I guess I'll end up doing that. Thanks

------------------
Adam
1988 Pontiac Fiero GT
2014 BMW 428i

I have one.

Pm sent