Pennock's Fiero Forum
  The Mall
  3800 SC swap harness and tuned PCM

Post New Topic  Post A Reply
Email This Page to Someone! | Printable Version


next newest topic | next oldest topic
3800 SC swap harness and tuned PCM by Dave E Bouy
Started on: 06-11-2020 09:16 PM
Replies: 4 (255 views)
Last post by: Dave E Bouy on 06-22-2020 06:36 PM
Dave E Bouy
Member
Posts: 1437
From: Kettle Point Ontario Canada
Registered: Sep 2004


Feedback score:    (6)
Leave feedback

Rate this member

Report this Post06-11-2020 09:16 PM Click Here to See the Profile for Dave E BouyClick Here to Email Dave E BouySend a Private Message to Dave E BouyEdit/Delete MessageReply w/QuoteDirect Link to This Post
3800 SC manual trans wiring harness and tuned pcm for sale. A/C, egr, evap and bbv delete. ICM mounts on trunk side firewall. Fuel pump relay and ALDL are located inside the center console glove box. This harness has been used for less than 1000 miles and pcm was tuned by Danny Mcillmoyle. 400 USD shipped. This is a pic of the actual harness
IP: Logged
PFF
System Bot
gomezaddams
Member
Posts: 15
From: gilboa
Registered: Dec 2015


Feedback score: N/A
Leave feedback

Rate this member

Report this Post06-15-2020 07:13 PM Click Here to See the Profile for gomezaddamsSend a Private Message to gomezaddamsEdit/Delete MessageReply w/QuoteDirect Link to This Post
Interested! is this pcm and harness for a series 1 or II ? Sorry if thats a dumb question but Im restarting a stalled project and relearning about these engines.
IP: Logged
Dave E Bouy
Member
Posts: 1437
From: Kettle Point Ontario Canada
Registered: Sep 2004


Feedback score:    (6)
Leave feedback

Rate this member

Report this Post06-16-2020 07:14 AM Click Here to See the Profile for Dave E BouyClick Here to Email Dave E BouySend a Private Message to Dave E BouyEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by gomezaddams:

Interested! is this pcm and harness for a series 1 or II ? Sorry if thats a dumb question but Im restarting a stalled project and relearning about these engines.


There are no dumb questions. This is a harness and PCM for a Series II
IP: Logged
Dave E Bouy
Member
Posts: 1437
From: Kettle Point Ontario Canada
Registered: Sep 2004


Feedback score:    (6)
Leave feedback

Rate this member

Report this Post06-17-2020 01:52 PM Click Here to See the Profile for Dave E BouyClick Here to Email Dave E BouySend a Private Message to Dave E BouyEdit/Delete MessageReply w/QuoteDirect Link to This Post
Bump
IP: Logged
Dave E Bouy
Member
Posts: 1437
From: Kettle Point Ontario Canada
Registered: Sep 2004


Feedback score:    (6)
Leave feedback

Rate this member

Report this Post06-22-2020 06:36 PM Click Here to See the Profile for Dave E BouyClick Here to Email Dave E BouySend a Private Message to Dave E BouyEdit/Delete MessageReply w/QuoteDirect Link to This Post
Well as it turns out what I thought was a blown 3800 turned out to backed out and broken flywheel bolts. Got that sorted out and the car back on the road today so this is no longer available. I do, however have a nearly completed 3800 swap harness that I simply haven't finished yet. It's built to same specs as the one listed here. If anyone wants it I just need your old harness to finish it plus $300.00 and I'll finish it up and send it.

DF

[This message has been edited by Dave E Bouy (edited 06-22-2020).]

IP: Logged

next newest topic | next oldest topic

All times are ET (US)

Post New Topic  Post A Reply
Hop to:

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock