not mine, but saw this today, https://www.ebay.com/b/Wheels-/43953

Check your link. Currently it lands on the eBay wheels and tires section, page 1 of 2 million total results...maybe make it a little more specific?

I think they are talking about these.,
not mine either.

https://www.ebay.com/itm/Ce...AOSw9mpaPEAe&vxp=mtr

Wow those are nice. I have 15" Centerline Legend Series Champ 506 2 piece Rotary Forged T6061 Billet Aluminum wheels on my car now. I would love to upgrade to 16" wheels. I have the Grand Am Brake upgrade now but these would allow for the Corvette brakes.

-Van

I believre 15" wheels . the picture shows the tape all the way out ot the outer side of rim. deduct the wheel lip and they are 15"

quote Originally posted by 420ponies: I believre 15" wheels . the picture shows the tape all the way out ot the outer side of rim. deduct the wheel lip and they are 15"

They are 16". I measured a 16" wheel in the basement and is was 17 1/4" outer lip to outer lip. The ones in the ebay ad are also at or over 17" outer lip to outer lip.

Anyone know if these are for a stock Fiero body? That one with the polished lip looks a little different from the rest.

From what I can see, they're for a wide body. Any wheel that wide will not go under a stock rear fender...Still a good buy.

Looks like they have been sold.

-Van

Looking at pictures of Fieros with Centerlines, they appear to be made for standard width. Thanks for the link mafv8.

Preliminary measurements look like the rears stick out a little further than the stock 15x7 but aren't made for a wide body. The front are 16x7 and rear 16x8. I've decided to go a different route so if anyone wants them let me know.

------------------
'84 2m4 Northstar 5 speed
'84 3800SCII sold
'86 GT-'92 3.4 TDC 5 speed(sold)

Looks like the rear wheels are about an 8" with an offset of about 35mm



The front are 7" with more positive offset