Nelson, Yes it is, and there's another one from Rodney Dickman.
Unfortunately I cannot remember if I used yours or Rodney's shifter for my F355 interior that you built. What is the difference (if any) between the two shifters?
Unfortunately I cannot remember if I used yours or Rodney's shifter for my F355 interior that you built. What is the difference (if any) between the two shifters?
Nelson
Nelson, Rodney's stick is shorter and chrome not brushed stainless.
For manual shifter only. Rodney Dickman has a chrome sleeve & ball that fits onto the stock auto stick.
Rob,
When you use Rodney's Automatic shifter with the gated plate does it require me to mount the gated plate off center (left) to allow the throw of the Automatic in the milled out gates to the right?
When you use Rodney's Automatic shifter with the gated plate does it require me to mount the gated plate off center (left) to allow the throw of the Automatic in the milled out gates to the right?
-Van
Yes, It is off center on the fi355 console by about 7/32 " .
