I need at least 1 and preferably a pair of wing stand gaskets. They can be in less than perfect condition as long as they are intact and work. The cheaper, the better.
I need at least 1 and preferably a pair of wing stand gaskets. They can be in less than perfect condition as long as they are intact and work. The cheaper, the better.
I have a few sets....none are in particularly good shape though. I'll go grab them and snap a few pics.
Here are some pics. I have one "loose" gasket and one matched pair. I have 2 other sets, but need to keep them for the two spoilers I have in the garage.
The loose one is in decent shape, but is a little hard. It still bends (I have had some that would snap in half if bent), but not as freely as the set. the matched pair appear to made from a different material (they have a different part #). They are much more flexible, but one is in rough shape. LMK if any of these interest you.
These things a like unicorns now, very difficult to find. I was able to get some last year but making a set out of some rubber would not be overly difficult either though.
[This message has been edited by Spadesluck (edited 04-28-2017).]
These things a like unicorns now, very difficult to find. I was able to get some last year but making a set out of some rubber would not be overly difficult either though.
There are either two or four variations. A guy in our club wanted to reproduce them a couple years back and he found that there were two deck lid variations and two stand variations.
Mrfiero: I'm doing a re-paint next week and the wing hasn't been removed yet for me to see how much, if any, the gaskets have degraded. If I don't feel that they can be reused, I'll probably fabricate replacements from a sheet of neopreme stock . Thanks for the reply. Rich
years back i had just went to ace hardware and bought a sheet of black rubber gasket material and made my own. it worked very well. i know it didnt have the little lip up around the edge like OEM, but still functioned as it should and was a a great bang for the buck!
