I am parting out a black 1986 SE.
It is mostly in tack less motor and some interior.
Let me know what you need and I will take pictures and post them.
The transmission is a 5 speed Isuzu.

quote Originally posted by 88_4mula: Let me know what you need and I will take pictures and post them.

I could use left a pillar trim molding if all the tabs are intact

------------------
87 coupe 4 cyl, 5 speed

PM sent

I had no idea you had one you are parting out..... I am sure Dean will be sniffing around there soon! LOL

I need the trunk hold down metal catch, that bolts to the rear firewall (the divider between the engine and trunk). It's held on with two 10mm nuts.

Just let me know when is a good time to come over and pick it up I can even take it off myself, and save ya the trouble

I also need a power window switch plate and a few other tiny little items.... I will have extra cash in hand when I come over.

Bump! You can call me if you would rather......

I removed it with out breaking anything. Just needs new paint.

both front mounts and top tab.

Ok, I feel pretty stupid right now! I got you and alex_4mula mixed up here on the forum! I thought it was Alex that posted in my wanting to buy thread.... LOL! Alex lives just a few miles from me, and that is why I expressed surprise that I did not know you...errrr.... he was parting out a Fiero LOL. Sorry about that!

Let me start again hahaha

I still need the hold down latch, but a price now shipped to 33463. Thanks and sorry for the mix-up!

Shipping UPS is expensive. To ship this piece , only 5 Lbs to AZ ground $50 because of the size. Box is 12" x 7" x 48".
Anybody have any ideas?

removed latch and bolts.

and it fits in the smallest box at the post office $10 shipping, Yea!

PM sent.

quote Originally posted by 88_4mula: Shipping UPS is expensive. To ship this piece , only 5 Lbs to AZ ground $50 because of the size. Box is 12" x 7" x 48". Anybody have any ideas?

Usps ground. You'd be surprised what you can ship through them, use the online postage purchase to save even more. I mailed a 1977 full size c10 tailgate (longer wider and much heavier) GA to TX for about $70 with insurance and oversize charges. 80s regal bumper GA to CA was 30-something...

Edit: if you can trim the box back to either 48x7x11 or 48x6x12 then marietta ga to tempe az (zips I knew) runs $18 for a 5# pkg on the online calculator

[This message has been edited by KennyC (edited 07-07-2016).]

bump it, bump it good!