One hard to find Cadillac CTS black leather and Chrome AUTOMATIC Shift Knob ADAPTED to fit and function on a Fiero shifter. It is in good shape with some finger nail scratches typical of a used leather shift knob (study the pictures closely). Just remove the old knob, slide on the base cover of the new knob then slide on the shifter handle until it bottoms out, now tighten the 15mm torx set screw at the back of the new knob and snap the base cover in place. The leather matches the color on the Fiero shifter boot, the boot itself is shorter so if you want it to hug the bottom of the new shifter base you will have to install the shifter then lift the boot over the shifter so you can see the underside of the boot and tie wrap the top of the boot to the shift handle at the base of the shifter, then re attach the boot. Most automatic shift boots have an elastic base that allows them to be easily removed, check your Fiero first. First $56 including shipping in the USA. PM if interested, I take PayPal.
[This message has been edited by Chief (edited 10-10-2015).]