I'm sure this has been asked about and posted about several times, but is there a current source for a replacement panel for the GT tail lights? I'd even be interested in buying a used one that needs a little TLC. Thanks in advance.

Hi, what do you mean by the panel? Do you mean the light assemblies themselves or the panel that they mount to?

Thanks,

Skip

Sorry about that. The one piece fiberglass panel that replaces the two clear lenses. Most of which I've seen using 4" round lights.

[This message has been edited by Meanspiritdave (edited 11-07-2014).]

Danyel has one for sale:

//www.fiero.nl/forum/Forum4/HTML/068353.html

Sadly Danyels just sold. Is there still a source out there for these panels? Every link I find is outdated.

quote Originally posted by Meanspiritdave: Sadly Danyels just sold. Is there still a source out there for these panels? Every link I find is outdated.

I see you already posted in the other thread for the 1 piece panel. The other option is PISA who sells a 2 piece panel with the 4" lights but again, it is two piece, not one........and also PISA's website is down for some reason but when it comes back up it is www.pisafierohq.com

One or two piece would work. I just thought the one piece looked "cleaner"

The Fiero PISA site is back up. Their GT tail lights look nice. Are they as nice as they look?

This is what they look like. I believe you cut the holes to fit:

Awesome, thanks!

fierowarehouse.com makes one. It's the one piece type. Mold came from Twin Lakes Fieros. Nice panel with the round Vette light holes (lights NOT included).

Not listed on the website, and no pictures. Not sure what they sell for either.

You can contact Doug at dmkfiero@ovis.net with Fiero or Parts? or Vette taillight panel in the subject line.

Give him time to answer, he's not on the computer every day.

HAGO!

[This message has been edited by Sage (edited 11-11-2014).]

Thanks for the info. I'll send him a note.

quote Originally posted by Sage: fierowarehouse.com makes one. It's the one piece type. Mold came from Twin Lakes Fieros. Nice panel with the round Vette light holes (lights NOT included). Not listed on the website, and no pictures. Not what they sell for either. You can contact Doug at dmkfiero@ovis.net with Fiero or Parts? or Vette taillight panel in the subject line. Give him time to answer, he's not on the computer every day. HAGO!

What the hell is this....the hidden menu at McDonalds? What else is Doug and yourself keeping from us ?

"I lift things up and put them down"

I don't have anything to do with the website, and obviously it hasn't been updated in a while. Doug's a very busy man!

I do think it (the taillight panel) might have been on there at one time, but really can't say for sure, that's all Doug's end of things.

I just saw where somebody was asking about a one piece panel, and I walk under the mold that makes one every day when I go into the shop! I've made a few of these in years past, not a bad part, but end user has to figure out how they want to attache it to the car, as there are no provisions in the mold. Never bothered to alter the mold, or manufacture add-on hard ware, as there just hasn't been much demand for them.

Yea, there are a few other items I can make that aren't listed anywhere.....


HAGO!

PM sent the canadian buyer backed out ..... its back up for grabs
regards
Danyel

[This message has been edited by Danyel (edited 11-12-2014).]

What else do you make for Fiero's that's not listed on FieroWarehouse site?

quote Originally posted by Sage: "I lift things up and put them down" I don't have anything to do with the website, and obviously it hasn't been updated in a while. Doug's a very busy man! I do think it (the taillight panel) might have been on there at one time, but really can't say for sure, that's all Doug's end of things. I just saw where somebody was asking about a one piece panel, and I walk under the mold that makes one every day when I go into the shop! I've made a few of these in years past, not a bad part, but end user has to figure out how they want to attache it to the car, as there are no provisions in the mold. Never bothered to alter the mold, or manufacture add-on hard ware, as there just hasn't been much demand for them. Yea, there are a few other items I can make that aren't listed anywhere..... HAGO!

We have many molds that came from IRM & DGP, not all of which are listed on the website.
Two examples off the top of my head, we have a mold that makes a fiberglass duplicate of the factory wing, and stands, but the attachment method between the stands and wing are different than stock, but it looks identical to stock when installed, just in fiberglass. Another is Jim Sutter's original fastback design molds, which there were only a few of made.

I've made several molds for one-off pieces that people wanted for different projects. Made a set of louvers to replicate those on the rear quarters of a 288GT fcar, still have the molds for those. Another one I recall right off is a "high rise" wing, which there's only been one or two of made, that might have been on the web page at one time, not sure if it's still there or not.

Then there's all the molds we brought back from Barrie, Ont. for fcar parts.

We also recently aquired Archie's molds to produce the Fino and Finale bodies.

There's more, but I think you get the idea.

If there's something specific you are interested in, shoot me a pm.

HAGO!