I'll get dimensions for you soon... basically would like the same script if possible. I think I even have a "Corvette" font on my computer if you need it.
I'll get dimensions for you soon... basically would like the same script if possible. I think I even have a "Corvette" font on my computer if you need it.
Those look awesome! Let me know how big you need, and I can make them. I have red and white, or silver if you like.
Very happy to have finally found your thread..id like to have3 of thefiero 2m 4.9 in black..mainly for my decklid and windows. Thanks. Card in hand. C-note
how tall can you go? I'd like put this along the bottom of the rear window (the letering and arrow head not the background that make it look like a bumpersticker in charcoal/gray if poss to match the indys ground affect color or red to match the stripe
Formula decals are still coming out a little shaky. Still working on those.
How are the "Formula" decals currently working out?
The letters (which are all connected) on the original Formula door decals stand out a tiny bit from the door skin. This may or may not be a dumb question, but would your replacement decals be designed and produced in the same manner as OEM, or would the letters instead be printed on a large clear piece of decal material?
[This message has been edited by Patrick (edited 10-03-2013).]
Very happy to have finally found your thread..id like to have3 of thefiero 2m 4.9 in black..mainly for my decklid and windows. Thanks. Card in hand. C-note
PM me with the size that you need. I have Matte Black as well as Gloss.
how tall can you go? I'd like put this along the bottom of the rear window (the letering and arrow head not the background that make it look like a bumpersticker in charcoal/gray if poss to match the indys ground affect color or red to match the stripe
and maybe the indy door letering as mine are starting to delaminate
I have Charcoal, and red. I'm doing a full vehicle wrap this weekend, but I'll get started on the graphics as soon as possible. I haven't tried the Indy doors yet. I'll see what I can come up with.
How are the "Formula" decals currently working out?
The letters (which are all connected) on the original Formula door decals stand out a tiny bit from the door skin. This may or may not be a dumb question, but would your replacement decals be designed and produced in the same manner as OEM, or would the letters instead be printed on a large clear piece of decal material?
I still have to cut a full size Fromula to check for flaws. Mine are die cut, so there is no clear backing. It is similar to the Factory, just a little thinner.
I have Charcoal, and red. I'm doing a full vehicle wrap this weekend, but I'll get started on the graphics as soon as possible. I haven't tried the Indy doors yet. I'll see what I can come up with.
p.m. me with a price on the "we build" one may take one in each color (charcoal/ red) like it to go full lenth of rear window if poss.
the door after you figure that out.. let me know.. no rush, but p.m. me in case the thread gets lost a few pages back
If you are still making decals, I am interested in a few. I need to but the hull numbers on my boat, and I would also like to name my boat. First off I was curious with letters and numbers would they be individual or on a strip. Other question would be the price. The hull numbers would be like 4 or 5in tall and would stretch out about 2 and a half feet. The name I would probably do around the same size. I would just have them plain black maybe with shadowing. Just a rough estimate would be fine given the lack of details I have given. Thank You. Oh and if I order them sooner than later could they be done before Christmas?
How much for one of these? Oh and the rear trunk lettering FIERO GT
-and I'm looking for a vinyl decal that says in quotes "I'm sorry fellas, your just too darn loud." For my Delorean's bumper but small like 1/2 or 3/4 inch tall letters. Regular font. Not sure of color yet maybe you can send me some preview samples? Maybe just white. Thanks please pm me some samples.
------------------ ===Always trying to find time to work on cars=== Louis Duet Baldwin, Long Island, NY ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "Blue" <= '85 Fiero GT Stock V6---Stock everything. Trying to keep it 'mostly' that way. ~~~~~~~~~~~~~~~~~~~~~ "Boo" <= '81 Delorean DMC-12 VIN #5835 Stock PRV engine Robertson Equipped Neiland/Delman Engineered Carbed and loving it! (Peugot 604 manifold) ---"Sorry purists"
I just love that Pegasus profile. Again, I wouldn't know what color , it would have to match the FIERO GT decal on the rear trunk. Hmmm. My car is bright fiero blue . Maybe white or navy blue. Hmmm
------------------ ===Always trying to find time to work on cars=== Louis Duet Baldwin, Long Island, NY ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "Blue" <= '85 Fiero GT Stock V6---Stock everything. Trying to keep it 'mostly' that way. ~~~~~~~~~~~~~~~~~~~~~ "Boo" <= '81 Delorean DMC-12 VIN #5835 Stock PRV engine Robertson Equipped Neiland/Delman Engineered Carbed and loving it! (Peugot 604 manifold) ---"Sorry purists"
------------------ ===Always trying to find time to work on cars=== Louis Duet Baldwin, Long Island, NY ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "Blue" <= '85 Fiero GT Stock V6---Stock everything. Trying to keep it 'mostly' that way. ~~~~~~~~~~~~~~~~~~~~~ "Boo" <= '81 Delorean DMC-12 VIN #5835 Stock PRV engine Robertson Equipped Neiland/Delman Engineered Carbed and loving it! (Peugot 604 manifold) ---"Sorry purists"
