I would like to get a sunshade for my 88GT beachwood interior. My bag is still in perfect condition so I don't need a storage bag. Can you let me know how long it might take? Do you take paypal? How much is the cost for just the sunshade (shipped to CA bay area 95051)? Please let me know. Do you know what color to do for the 88GT beachwood? Please let me know.
Larry here is your sunshade drying. I have to make sure that the glue is all dried before shipping or it will bleed. I use a certin type of glue to make sure that they never fall apart.
Please provide pricing and estimated delivery times for T-Top shades for an 88 with a Beechwood interior.
Nelson
There is a up charge for beechwood material on this. 30.00 is the up charge so with the bag and shades then you will be at 110.00. If you go with the straight tan then you will be at 80.00 total.
Originally posted by Fiero Thomas: Here is a set of t-top shades on there way out
What holds the T top shades in place ? The sunroof shades for that matter. To keep them from falling on you during a bump. That is a safety concern. Another question. Is the T top shade bag stout enough and large enough that it can do double duty. Holding the shades and the T top glass ? I have a set of other than Fiero GM T top bags. I most likely have not seen all that you offer. What do you offer for just T top glass storage ?
The sunshade for the sunroof sits on the rim of the gasket. it will not fall. the t-top ones sit just on the inside of the gasket and will not fall on you. there is no safty concers at all with them. They are secure and the sunroof sunshade is just like the OEM shade so there was no concern with the OEM stuff there is no concern with my stuff. I would think mine is more secure as it is a bit thicker then OEM.
The bag will not hold the t-tops in them. I make t-top bags as well. they are a bit smaller.
Here is another set that I have finished and going on tomorrow. Felt good today. They got me on some nice painkillers right now for the kidney stones that I have in the kidney bank.
This is the full Faux Leather setup for the bag with the gt logo on it.
Hooah! Thanks Tom! I received my t-top shades mid-week, just had a chance to install them today. Once again, your work is awesome!
Here's a close-up of the edge sewing. Talk about detail!
Here's a close-up of the sides, to give you an idea on how thick they are. Or...rather how thin they are. Thin, but very sturdy!
Here's a close-up on the install. They fit right into the seals, no way these babies will drop down.
Here's what it looks like installed, before replacing the t-top.
And finally, here's what they look like from inside. The color match and fitment is incredible. LOL...now I HAVE to replace my drooping headliner to match these awesome shades.
Thanks again Tom for a great product!
[This message has been edited by Fiero-in-Paradise (edited 12-13-2009).]
Hooah! Thanks Tom! I received my t-top shades mid-week, just had a chance to install them today. Once again, your work is awesome!
Here's a close-up of the edge sewing. Talk about detail!
Here's a close-up of the sides, to give you an idea on how thick they are. Or...rather how thin they are. Thin, but very sturdy!
Here's a close-up on the install. They fit right into the seals, no way these babies will drop down.
Here's what it looks like installed, before replacing the t-top.
And finally, here's what they look like from inside. The color match and fitment is incredible. LOL...now I HAVE to replace my drooping headliner to match these awesome shades.
Thanks again Tom for a great product!
How did I miss this. Looks good and thank you for the photos
I would like to get a sunshade for my sunroof car. I know I am being picky, but where you reinforced the notch for the sunroof handle:
Can that reinforcement material be put under the outer layer? To me it just seems to give it kinda of an unfinished look. NO disrespect to you in any way! I love the craftsmanship in these!
I would like to get a sunshade for my sunroof car. I know I am being picky, but where you reinforced the notch for the sunroof handle:
Can that reinforcement material be put under the outer layer? To me it just seems to give it kinda of an unfinished look. NO disrespect to you in any way! I love the craftsmanship in these!
PM sent
[This message has been edited by Fiero Thomas (edited 11-14-2010).]
Thank you all for the support on these items and letting me make them over the last three years. I will still offer all items at a shipped at a shipped rate as normal.
Looks like mine are almost ready for their curtain call! Awesome Tom! Can't wait to get them. Hopefully I'll be able to get the headliner and shades installed this weeked. The shifter and e-brake covers are in and look great. I will post pics of them all once everything's married to my baby. Keep up with the great work and continue to take care of yourself FIRST!
THese are yours for sure. They came out really well/ Cut the boards last week and started the fabric wrap on them and finished them up today. I need to make your bag in the morning and ship them ou out to you. Thanks again for the business and yes I am taken care of me I have dr appointment #2 tomorrow.
