Pennock's Fiero Forum
  Technical Discussion & Questions
  Replacing Power Window Motors

Post New Topic  Post A Reply
Email This Page to Someone! | Printable Version


next newest topic | next oldest topic
Replacing Power Window Motors by imacflier
Started on: 06-30-2020 01:23 PM
Replies: 3 (100 views)
Last post by: Spadesluck on 07-01-2020 06:09 PM
imacflier
Member
Posts: 845
From: Levittown, NY, USA
Registered: Apr 2002


Feedback score: (1)
Leave feedback

Rate this member

Report this Post06-30-2020 01:23 PM Click Here to See the Profile for imacflierClick Here to Email imacflierSend a Private Message to imacflierEdit/Delete MessageReply w/QuoteDirect Link to This Post
Good Afternoon, All,

I am going to replace my power window motors with Rodney's really fast motors.

I searched and found the really excellent thread by josef644.

My question is pretty simple: is it easier to do the replacement with both the inner panel AND the door skin off?

TIA

Larry
IP: Logged
PFF
System Bot
fierosound
Member
Posts: 14292
From: Calgary, Canada
Registered: Nov 1999


Feedback score: N/A
Leave feedback





Total ratings: 278
Rate this member

Report this Post06-30-2020 05:57 PM Click Here to See the Profile for fierosoundClick Here to visit fierosound's HomePageClick Here to Email fierosoundSend a Private Message to fierosoundEdit/Delete MessageReply w/QuoteDirect Link to This Post
I replaced all my motors on both my cars.
I only removed inner door panels to do them.
That's enough work as it is...

------------------
My World of Wheels Winners (Click on links below)

3.4L Supercharged 87 GT and Super Duty 4 Indy #163

IP: Logged
imacflier
Member
Posts: 845
From: Levittown, NY, USA
Registered: Apr 2002


Feedback score: (1)
Leave feedback

Rate this member

Report this Post06-30-2020 08:01 PM Click Here to See the Profile for imacflierClick Here to Email imacflierSend a Private Message to imacflierEdit/Delete MessageReply w/QuoteDirect Link to This Post
fierosound

Thanks for the advice....I thought maybe I would save enough time on the motors and regulators to justify pulling the door skin as well.


Larry
IP: Logged
Spadesluck
Member
Posts: 1679
From: New Mexico
Registered: Jul 2016


Feedback score:    (6)
Leave feedback

Rate this member

Report this Post07-01-2020 06:09 PM Click Here to See the Profile for SpadesluckSend a Private Message to SpadesluckEdit/Delete MessageReply w/QuoteDirect Link to This Post
Just like mentioned above, the inside door panel is all you need to take off to get to the motors. Now if there is more going on, these cars are old, you can take the outer door skin off as well to better access everything. That is not very hard to do either.
IP: Logged

next newest topic | next oldest topic

All times are ET (US)

Post New Topic  Post A Reply
Hop to:

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock