|Originally posted by mmeyer86gt/gtp:|
so i am running a gen 5 blower with adapter to run a series 2 intake. Will a throttle body spacer add something?
The spacer is not there to add more power but to adapt the series 2 TB ( or a N* unit) to the series 3 supercharger
You can go to a 3.5" pulley, 180* stat, 3" exhaust and cooler plugs for more power but if you go 3.4" or below you will need to add an intercooler.
------------------ " THE BLACK PARALYZER"
-87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Flotech Afterburner Exhaust, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, HP Tuners VCM Suite. "THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE "
[This message has been edited by Dennis LaGrua (edited 06-12-2015).]