Anyone know what the size of the hose is that is between the fuel filter and the fuel tank hard lines? 88GT, but imagine they are the same on other V6 cars.

Thanks,

Sorry, don't have that info handy.
I replaced mine with new hose from Fiero Store.
http://www.fierostore.com/P...ail.aspx?s=66636&p=1

------------------
Calgary time/temp

3.4L Supercharged 87 GT Click me
Super Duty 4 Indy #163 Click me

Thanks Tony - but wrong hose(s).

Looking for the one coming off the fuel pumps hard line to the fuel filter hard line.

I forgot the old one at home and wanted to pick up a new line on the way home as the old one is leaking. Probably 3/8" or 5/16" or something along that lines.

I dunno either. Could get a few feet of 3 sizes around that size, that kind of thing is nice to have on hand anyway.

Finally found an online parts diagram: http://www.gmpartseast.com/...103-l44md92pg97.html

Part #38 and it looks like it is 3/8"

Thanks to those that helped.

I ran out and measured the steel inlet line to the filter. It is 0.4", so 3/8" (ID) would make sense for the rubber hose.

I just went out to the garage to my parts pile and found a set of fuel lines off 86gt looks like 3/8 to me

3/8” feed, 5/16" return and vent.

quote Originally posted by Mickey_Moose: Thanks Tony - but wrong hose(s).

Oops - misread that as "fuel filler" instead of "fuel filter"...

Just watch PSI rating...
Vent and return can be any type of fuel hose because they get no pressure but V6 uses "high pressure" type on pump to engine line.

------------------
Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should.
(Jurassic Park)

The Ogre's Fiero Cave (It's also at the top and bottom of every forum page...)