I have an 88GT and now after 27 years I'm starting to have issues with the Speedo/Tach cluster assembly. The Mylar circuit board board is just about completely shot from corrosion. I can fix simply line trace breaks, but the corrosion is so wide spread and the connector pads are all peeling its seeing its last days.




So my question, does anyone know if a reproduced circuit board is available for the Fiero? I see that reproduced ones are available for other GM cars.
(this one is for a 86-89 Camaro)


Other question, since I'm only familiar with the 88's, Would all year model circuit boards be the same? I know there are differences in the speedos , shift lights ect.


Any help or info would be appreciated..

Id get one or a whole guage pod from a junkyard. Or ask in "the Mall" here, there should be alot of used ones without corrosion.
(I'm not sure of there is a difference in years but you would need one from a V6.)

https://www.fiero.nl/cgi-bin...&number=4&LastLogin=

[This message has been edited by 2.5 (edited 03-20-2015).]

84s are (I'm pretty sure) different. 85s, I'm not sure.
I'm pretty sure that 86 and up are the same.
Should be easy to tell, by looking, if you can compare them side by side.