I pulled a set of lebaron brakes off a car I purchased, but they kind of messed up the hard lines in the rear to put on the brakes because the steel braided lines they used were too short. Does anyone have a part number or just the right length of the lines I should get for the lebaron swap for the rear brakes.

thanks for any help, Matt

http://www.ebay.com/itm/Sta...em2c802939e5&vxp=mtr

I used the apex from ebay, I do not have the caddy/lebaron swap but these seem to be pretty good at a good price.

------------------


87GTseries 1 3800sc (7.597 @88.53 1.579 60ft)
(series II swap in progress)
85GT Northstar/ 4t80e
86GT 3800 n/a---sold
Northstar Rebuild

The Fiero store has longer E brake cables made for the Lebaron swap. Email Justin at info@fierostore.com and ask him for a set. They are high quality and fit perfect. They are the same price as the regular replacement E brake cables but made longer.

------------------
woodys 427

I am looking for the hydraulic lines, but thank you for the tip on the ebrake lines.