First
◄
Page 1 of 1
►
Last
Goto
engine compression on cold setting for year engine by dratts
Started on : 08-06-2018 01:26 PM
Replies : 2 (150 views)
Last post by : shemdogg on 08-09-2018 09:29 PM
Aug 6th, 2018
dratts Member Posts: 8373 From: Coeur d' alene Idaho USA Registered: Apr 2001
I just got shipped a 2.8 with 10,000 miles on a rebuild. When I check the compression I get 60-75 on all but one cylinder that doesn't show anything 0. I know that the 0 compression is bad. What should I register on the other cylinders?
01:26 PM
PFF
System Bot
dratts Member Posts: 8373 From: Coeur d' alene Idaho USA Registered: Apr 2001
This is on a cold engine that has been setting for more than a year. I haven't squirted oil into the cylinders yet.
02:07 PM
Aug 9th, 2018
shemdogg Member Posts: 1742 From: The Ghetto CA USA Registered: Apr 2017
Sounds like the motors bad, should be above 110psi shem
09:29 PM
First
◄
Page 1 of 1
►
Last
Goto
Contact Us | Back To Main Page
Advertizing on PFF | Fiero Parts Vendors PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay
Copyright (c) 1999, C. Pennock