Hello I removed my lower control arms and on one side I had to cut the bolt as it was rusted in the sleeve. The bushings are Prothane and I was told they do not sell the inner sleeves. I am going to put the LCA's back on as the 87 LCA's work better than the 84's I just installed. 87 has Prothane and 84 has poly. Car is 87. I can do a picture if need be.

[This message has been edited by solotwo (edited 12-22-2015).]

Prothane is in California a few hours from me and I just called them for you. Unfortunately, sales was unavailable, tech was not in, and the operator was worthless. I can try again tomorrow earlier in the day if you want.

Just to make sure, you need the metal sleeve for the 1987 bushings right?

quote Originally posted by solotwo: 87 has Prothane and 84 has poly. Car is 87.

,

Prothane is the name of the company, making polyurathane bushings,
so it sounds like you already have poly everywhere.

But they sell the sets cheap on eBay, thats where I got mine for both my 86 and 88

I need the sleeve or bushing that the bolt goes thru for the LCA. Yes it is an 87 LCA but 85-87 are same.

I'll give them a call tomorrow for you.

nm I miss read

[This message has been edited by sardonyx247 (edited 12-23-2015).]

quote Originally posted by IMSA GT: I'll give them a call tomorrow for you.

Thank you!

Well, they sell just the sleeves....but only a minimum order if 50.
The tech recommended just buying some DOM tubing and cutting your own.
He says that is all their kits use and they simply cut their own.

quote Originally posted by IMSA GT: Well, they sell just the sleeves....but only a minimum order if 50. The tech recommended just buying some DOM tubing and cutting your own. He says that is all their kits use and they simply cut their own.

Thank you!

Have a Merry Christmas

[This message has been edited by solotwo (edited 12-24-2015).]

You too Steve.