Where is the best place to find one of these engines? I'm considering a swap in my formula.

------------------
Go here to see more of my Formula: " TARGET=_blank>http://www.cardomain.com/memberpage/430754

In your backyard; Cleveland...
Morad Parts Company

quote Originally posted by Robertzep2: In your backyard; Cleveland... Morad Parts Company

Ed may be reliable and honest but you'll pay considerably more that other yards for one of his 3800SC engines. The last 3800SC that I purchased locally with 60,110 miles on the OD cost me $600 complete. The 4T65eHD from the same car was $200. Now price Ed, look at his 3800 engines on eBay and hold on. The man is greedy.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Powerlog manifold, Northstar TB, LS1 MAF, 3" Flotech Afterburner Exhaust, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

Eds good dealer. Last time I pulled a 3800 I did the math and found better to buy a car with issues. I mean your in northeast ohio rust sucks . But you may be able to find a lower milage rusted out 96 97 and get everything you need and scrap the car for a return. Last one I drove the car for a month Well till the temp tags ran out. Got a feel of the motor new what to address had some fun then pulled it.