I'm looking to have some hoses made. These are for the 87-88 V-6. They go from the rear firewall to the engine and passenger side lower coolant tube. One goes from the firewall to the thermostat housing and the other goes from the firewall to the lower passenger side coolant tube. Most just use straight heater hose on these as they are mostly straight pieces of heater hose (maybe a slight curve). Some may want matching hoses to match my reproduction coolant hoses. So I'm looking for OEM GM used hoses. Can be junky as long as I can get the basic length and curvature etc from them. Can be slit to get them off the tubes they go to.
------------------
Rodney Dickman
Fiero Parts And Acc's Web Page:
All new web page!:www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575
