So this Saturday I have an opportunity to put my car on a Dino for $65 for 2 pulls. I am running a 3.4 p/r 7730 ECM, dis, 260 cam, 1.6 roller tipped rockers, WCF short headers, high flo cat, magnaflow muffler and "dawg" intake mod. What is your best guess as to the HP I'm putting down? I'm thinking about 170.

Very interested in what your car produces. I think you're high by 10hp. But hoping you get 180!

------------------
1986 Fiero GT Fastback 3.4Lpr with 4T60
1979 Naked Honda Goldwing - sold
1983 Honda Goldwing 1100 Interstate

167.4 WHP

Any head work? Stock throttle body? Injector size?

I'm thinking you're pretty close. Maybe 175 (That cam with the 1.6 rockers is very similar to a 272.)

[This message has been edited by Raydar (edited 10-04-2013).]

Stock throttle body, 17lb injectors and sadly no head work. I did not know of any shops that did porting when I rebuilt. So I just had them rebuilt. I did not want to screw them up.

165

130HP.

145-150 HP at the wheels if you have a manual transmission.

Nelson

155 WHP, optimistically.

I'm so excited for the big reveal! I'm guessing 165-170 hp

Auto or manual? Auto 135, Manual 150.

Unfortunately, it has to be put on hold for a lil bit. I got rear break issues do to crappy remans from calipersonline. I'll make a new thread about that.

I can tell you that 3.4PR made 130 at the wheels at 2600' altitude uncorrected with headers, no cat, Jacobs' ignition, 19# injectors, and a K&N intake. Stock ECM though, this was before the advent of the 7730 swap.

I was sad panda.

This was back in 2002.



It did make a lot of torque though, 180 Ft. Lbs. to the wheels.

------------------


Build thread for my 88 + 3800NA swap

[This message has been edited by aaronkoch (edited 10-06-2013).]