This is true, However the mounting bracket for the convenience center is going to need some tweaking on the earlier models. It was never intended to have a subwoofer so it's not exactly a 100% bolt-in.
IP: Logged
01:12 AM
johnyrottin Member
Posts: 5464 From: Northwest Florida Registered: Oct 2007
Originally posted by jscott1: This is true, However the mounting bracket for the convenience center is going to need some tweaking on the earlier models. It was never intended to have a subwoofer so it's not exactly a 100% bolt-in.
On pre 86 you need to replace the heater core cover and the right vertical carpet support with the same parts from any 86-88. Then it bolts right in, no tweaking. I can supply the two plastic parts needed.
[This message has been edited by partfiero (edited 05-31-2013).]
IP: Logged
10:19 AM
partfiero Member
Posts: 6923 From: Tucson, Arizona Registered: Jan 2002
Does the system work on all radios? If so I am next in line behind FieroGT42.
The amp on these has no built in relay. On non stock radios a relay needs to be installed in the wiring harness , I will supply the relay and diagram, easy to do. Can do it before I send it also. Don't think FieroGT42 is going to take it.
[This message has been edited by partfiero (edited 06-01-2013).]
IP: Logged
10:28 AM
jscott1 Member
Posts: 21676 From: Houston, TX , USA Registered: Dec 2001
On pre 86 you need to replace the heater core cover and the right vertical carpet support with the same parts from any 86-88. Then it bolts right in, no tweaking. I can supply the two plastic parts needed.
