I'll be adding and updating this often. Make offers on anything you like. If you see something not mentioned, feel free to ask.
Brand new in box Accumulator part # 7392N
1988 Rear left and right brake hoses. Brand new in package. part numbers 70211, 70212 "brakeware" brand 88 decklid strut. New strut rod. Used less than a month. [TRADED] 88 coupe/formula strut tower brace. adjustable. [TRADED] 88 formula rear sway bar with mounts. needs cleaned up and painted. rear wing. good shape. all studs intact, brand new gaskets. needs paint. 88 cradle. no rust. several sets of drip rails. fastback and notch. tons of misc. plastics. gauge clusters, etc. I'm looking for a few parts if you would rather trade. I need an auto shifter, with cable(cable FOUND!), and surround plate. prefer the 88, but any will do. 4.9 engine/trans brackets. 4.9 harness (if I can't make my own. still working on it) ECM programmed. nice wheels/tires 17" or bigger. rear tie rods inner and outer for 86GT. Must be new. rear brake upgrade for 86GT. Aluminum or poly rear cradle mounts. rear ball joints. (new) 86GT round marker lights. [FOUND] complete braided brake hose set. Power mirror setup. [FOUND] rear hubs. (new) fuel pump for 4.9 conversion. 88 4 cylinder throttle cable for 4.9 swap.[FOUND] trashed aero nose. (making a chin spoiler.) Complete sunroof latch. [FOUND] Anything cool.
The strut bar is pending a trade through PM. It should fit all 88's.(after thinking about it, I'm not positive the decklid grills will line up with the brace on the GT) I'll update if no trade is made. I also have an 88 decklid strut that may be up for sale/trade tomorrow.
[This message has been edited by Carver1 (edited 05-29-2012).]
IP: Logged
11:52 PM
May 29th, 2012
BMTFIERO Member
Posts: 1187 From: Beaumont, TX Registered: Dec 2007
I'm not even sure how to ship a cradle. Wrap it in cardboard and take it to ups? I'm sure it is not cheap with the weight and size. I suck at pricing items for sale. I'm a lot better at buying them! Shoot me an offer.
IP: Logged
12:16 AM
NoMoreRicers Member
Posts: 2192 From: Spokane, WA Registered: Mar 2009
I'm not even sure how to ship a cradle. Wrap it in cardboard and take it to ups? I'm sure it is not cheap with the weight and size. I suck at pricing items for sale. I'm a lot better at buying them! Shoot me an offer.
I am also interested in the cradle. I think Greyhound would be good for shipping a cradle, but I'm not positive. Please keep me next in line.
I'm interested in the strut brace (looks like I'm third in line), & the rear sway bar - maybe the brake hoses if they're made in U.S. I have an auto shifter, '88 shifter surround, new Poly cradle mounts, & can of course make fiberglass parts. I have NO money.... ~ Paul aka "Tha Driver"
I think I got back to everyone from the thread and PM's. If I left you out, hit me up again. I work pretty late hours, but try to catch up from my phone or when I get home.
IP: Logged
11:12 PM
PFF
System Bot
Carver1 Member
Posts: 2843 From: Edgewood, New Mexico Registered: Nov 2000
if you have any fast back drip rails with no dents (my passenger side is prety banged up) if you will seel just the one fine but ill buy both of they are in very good condition and not too expensive. let me know. zip is 07764. thanks al
[This message has been edited by ace5514 (edited 05-31-2012).]
IP: Logged
02:36 AM
flimbob Member
Posts: 642 From: Plano, Texas, USA Registered: May 2008
I think I found a way to ship the drip rails. I have some heavy angled cardboard at work that may protect them for the trip. I'll check it out more tomorrow. Since there are two people wanting each side, and one wanting a set, I think I am out of fastback moldings for now, but I will double check. I may have another that is a little rough. (I don't use them on mine, so they have been collecting) I'll PM all the people that were interested when I am sure I can ship them out safely.
IP: Logged
11:30 PM
Jun 1st, 2012
Phirewire Member
Posts: 1531 From: Hamburg, PA Registered: May 2012
